Abstract:In this work, SAPO-11, SAPO-11-γ-Al 2 O 3 and SAPO-11-ZSM-5-γ-Al 2 O 3 molecular sieve supports were prepared by static hydrothermal synthesis, which SAPO-11-γ-Al 2 O 3 and SAPO-11-ZSM-5-γ-Al 2 O 3 supports were loaded with Co and Mo as active metal components. The hydroisomerization properties of n-hexadecane on SAPO-11, SAPO-11-γ-Al 2 O 3 and SAPO-11-ZSM-5-γ-Al 2 O 3 molecular sieves were investigated, as well as the effects of reaction temperature, reaction time, solid–liquid ratio and reaction pressure on the hydroisomerization properties. The results demonstrated that the SAPO-11 molecular sieves synthesized under the ratios of 1Al 2 O 3 :2P 2 O 5 :0.6TEOS:1.2DPA:55H 2 O, crystallization time of 48 h, and crystallization temperature of 180 °C had high crystallinity and uniform size distribution, and the pore structure was more obvious. After loading metals onto the SAPO-11-γ-Al 2 O 3 molecular sieves, the charged metals partially block the pores or pore openings of the molecular sieves, leading to a reduction in specific surface area and pore volume. As a result, some acidic sites become occupied by the metals, weakening the acidity. The results of the hydroisomerization experiments showed that the SAPO-11 molecular sieves achieved maximum isoparaffin selectivity and isoparaffin yield, reaching values of 31.26% and 28.32%, respectively, at 340 °C over a reaction time of 60 min. The selectivity and yield reached maximum of 51.02% and 43.76% at liquid–solid ratio up to 25:1. The selectivity and yield reached maximum values of 55.82% and 51.2% at an initial reaction pressure of 5 MPA. For the SAPO-11-γ-Al 2 O 3 supports, the selectivity and yield the maximum values of 79.50% and 71.49% at a metal Co: Mo loading ratio of 1:3 was achieved. For the SAPO-11-ZSM-5-γ-Al 2 O 3 supports, the selectivity and yield the maximum values of 55.44% and 54.05% were achieved with ZSM-5 loading of 30 wt%. These catalysts have the potential for a wide range of applications.

Synthesis and Characterization of Magnesium-Substituted Aluminophosphate Molecular Sieves (Mgapo-11) and Their Kinetic Study of Catalytic Cracking of N-Hexane

A High-Efficiency and Low-Cost Solid-State Synthesis Strategy for Fabricating (Mg)alpo-11 Zeotypes with Excellent N-Hexadecane Hydroisomerization Performance

Investigation into the Role of MgO in the Synthesis of MAPO-11 Large Single Crystals

Direct synthesis of shaped MgAPO-11 molecular sieves and the catalytic performance in n -dodecane hydroisomerization

Synthesis and Catalytic Performances of Mesoporous Aluminosilicates of Cubic and Hexagonal Structure with Stronger Acid Sites

Organic-free modulation of the framework Al distribution in ZSM-5 zeolite by magnesium participated synthesis and its impact on the catalytic cracking reaction of alkanes

Synthesis of Fe, Co, and Mn substituted AlPO-5 molecular sieves and their catalytic activities in the selective oxidation of cyclohexane

Preparation and n-hexadecane hydroisomerization properties of SAPO-11-based composite molecular sieve

Synthesis of SAPO-44 molecular sieve and its catalytic performance in methanol-to-olefins reaction

Synthesis and Characterization of SAPO-56, a New member of silicoaluminophosphate

Synthesis, Characterization and Catalytic Applications of Mesoporous Γ-Alumina from Boehmite Sol

Synthesis of Nanoporous Flower-like Y-SAPO-11 Composite Molecular Sieves for Hydrocracking of n -Hexadecane

Synthesis and Characterization of Al-Msu-S Mesoporous and Meso-Microporous Molecular Sieves and Their Catalytic Performance

Shape-selective catalysts of Mg2+ ion exchange modified SAPO-11 molecular sieves for alkylation of 2-methylnaphthalene

Cobalt-substituted aluminophosphate molecular sieves: x-ray absorption, infrared spectroscopic, and catalytic studies

Influence of Al2O3 Content in Pelletized SAPO-11 Molecular Sieves on Their Physicochemical Properties, Activity, and Selectivity in Hydroisomerization of n-Hexadecane

Synthesis and Application of SAPO-11 Molecular Sieves Prepared from Reaction Gels with Various Templates in the Hydroisomerization of Hexadecane

Oxidative Dehydrogenation Of Ethane Over Modified Magnesium Oxides

High Activity in Catalytic Cracking over Stable Mesoporous Aluminosilicates

Two-Step Dry Gel Method Produces MgAPO-11 with Low Aspect Ratio and Improved Catalytic Performance in the Conversion of Methanol to Hydrocarbons

Production of Oxygen-containing Compounds Catalytic from Depolymerization of Calcium Lignosulphonate by Submicron-scale MgAl Solid Base