Abstract:In this work, SAPO-11, SAPO-11-γ-Al 2 O 3 and SAPO-11-ZSM-5-γ-Al 2 O 3 molecular sieve supports were prepared by static hydrothermal synthesis, which SAPO-11-γ-Al 2 O 3 and SAPO-11-ZSM-5-γ-Al 2 O 3 supports were loaded with Co and Mo as active metal components. The hydroisomerization properties of n-hexadecane on SAPO-11, SAPO-11-γ-Al 2 O 3 and SAPO-11-ZSM-5-γ-Al 2 O 3 molecular sieves were investigated, as well as the effects of reaction temperature, reaction time, solid–liquid ratio and reaction pressure on the hydroisomerization properties. The results demonstrated that the SAPO-11 molecular sieves synthesized under the ratios of 1Al 2 O 3 :2P 2 O 5 :0.6TEOS:1.2DPA:55H 2 O, crystallization time of 48 h, and crystallization temperature of 180 °C had high crystallinity and uniform size distribution, and the pore structure was more obvious. After loading metals onto the SAPO-11-γ-Al 2 O 3 molecular sieves, the charged metals partially block the pores or pore openings of the molecular sieves, leading to a reduction in specific surface area and pore volume. As a result, some acidic sites become occupied by the metals, weakening the acidity. The results of the hydroisomerization experiments showed that the SAPO-11 molecular sieves achieved maximum isoparaffin selectivity and isoparaffin yield, reaching values of 31.26% and 28.32%, respectively, at 340 °C over a reaction time of 60 min. The selectivity and yield reached maximum of 51.02% and 43.76% at liquid–solid ratio up to 25:1. The selectivity and yield reached maximum values of 55.82% and 51.2% at an initial reaction pressure of 5 MPA. For the SAPO-11-γ-Al 2 O 3 supports, the selectivity and yield the maximum values of 79.50% and 71.49% at a metal Co: Mo loading ratio of 1:3 was achieved. For the SAPO-11-ZSM-5-γ-Al 2 O 3 supports, the selectivity and yield the maximum values of 55.44% and 54.05% were achieved with ZSM-5 loading of 30 wt%. These catalysts have the potential for a wide range of applications.

Influence of Al2O3 Content in Pelletized SAPO-11 Molecular Sieves on Their Physicochemical Properties, Activity, and Selectivity in Hydroisomerization of n-Hexadecane

Hydroisomerization with a Hierarchical SAPO‐11 Supported Ni Catalyst: Effect of DTAB Content[]**

Synthesis and Application of SAPO-11 Molecular Sieves Prepared from Reaction Gels with Various Templates in the Hydroisomerization of Hexadecane

Preparation and n-hexadecane hydroisomerization properties of SAPO-11-based composite molecular sieve

Synthesis and hydrogen isomerization performance of ordered mesoporous nanosheet SAPO-11 molecular sieves

Synthesis and Characterization of SAPO-11 Molecular Sieves from Alcoholic Systems

Hydroisomerization of Long-Chain Alkane Over Pt/SAPO-11 Catalysts Synthesized from Nonaqueous Media

Crystallization of SAPO-11 Molecular Sieves Prepared from Silicoaluminophosphate Gels Using Boehmites with Different Properties

Synthesis and Characterization of SAPO-56, a New member of silicoaluminophosphate

SAPO-11 molecular sieves synthesized in alcohol-water concentrated gel system with improved acidity, mesoporous volume and hydroisomerization performance

Synthesis of SAPO-44 molecular sieve and its catalytic performance in methanol-to-olefins reaction

Catalytically Active and Hierarchically Porous Sapo-11 Zeolite Synthesized in the Presence of Polyhexamethylene Biguanidine

Synthesizing hierarchically porous SAPO-11 with polyvinyl alcohol phosphates as mesopore template: effects of phosphorus content and concentration of templates

Synthesis and Characterization of Magnesium-Substituted Aluminophosphate Molecular Sieves (Mgapo-11) and Their Kinetic Study of Catalytic Cracking of N-Hexane

Design and Preparation of Efficient Hydroisomerization Catalysts by the Formation of Stable Sapo-11 Molecular Sieve Nanosheets with 10-20 Nm Thickness and Partially Blocked Acidic Sites

Optimization of the pore structure and acidity of SAPO-11 for highly efficient hydroisomerization on the long-chain alkane

Synthesis of Nickel In Situ Modified SAPO-11 Molecular Sieves and Hydroisomerization Performance of Their NiWS Supported Catalysts

Advances in SAPO-11 molecular sieve in alkane isomerization

A Highly Active Si-Enriched Pt/Sapo-11 Catalyst Synthesized by the Solvothermal Method for the N-Dodecane Hydroisomerization

Effect of silica/alumina ratio and structure-directing agent on the physical and chemical properties of SAPO-34

Synthesis of SAPO-31 Nanorod in Ethylene Glycol–Water Medium and Its Catalytic Performance in the n-Hexadecane Hydroisomerization