Abstract:In this work, SAPO-11, SAPO-11-γ-Al 2 O 3 and SAPO-11-ZSM-5-γ-Al 2 O 3 molecular sieve supports were prepared by static hydrothermal synthesis, which SAPO-11-γ-Al 2 O 3 and SAPO-11-ZSM-5-γ-Al 2 O 3 supports were loaded with Co and Mo as active metal components. The hydroisomerization properties of n-hexadecane on SAPO-11, SAPO-11-γ-Al 2 O 3 and SAPO-11-ZSM-5-γ-Al 2 O 3 molecular sieves were investigated, as well as the effects of reaction temperature, reaction time, solid–liquid ratio and reaction pressure on the hydroisomerization properties. The results demonstrated that the SAPO-11 molecular sieves synthesized under the ratios of 1Al 2 O 3 :2P 2 O 5 :0.6TEOS:1.2DPA:55H 2 O, crystallization time of 48 h, and crystallization temperature of 180 °C had high crystallinity and uniform size distribution, and the pore structure was more obvious. After loading metals onto the SAPO-11-γ-Al 2 O 3 molecular sieves, the charged metals partially block the pores or pore openings of the molecular sieves, leading to a reduction in specific surface area and pore volume. As a result, some acidic sites become occupied by the metals, weakening the acidity. The results of the hydroisomerization experiments showed that the SAPO-11 molecular sieves achieved maximum isoparaffin selectivity and isoparaffin yield, reaching values of 31.26% and 28.32%, respectively, at 340 °C over a reaction time of 60 min. The selectivity and yield reached maximum of 51.02% and 43.76% at liquid–solid ratio up to 25:1. The selectivity and yield reached maximum values of 55.82% and 51.2% at an initial reaction pressure of 5 MPA. For the SAPO-11-γ-Al 2 O 3 supports, the selectivity and yield the maximum values of 79.50% and 71.49% at a metal Co: Mo loading ratio of 1:3 was achieved. For the SAPO-11-ZSM-5-γ-Al 2 O 3 supports, the selectivity and yield the maximum values of 55.44% and 54.05% were achieved with ZSM-5 loading of 30 wt%. These catalysts have the potential for a wide range of applications.

SAPO-11 molecular sieves synthesized in alcohol-water concentrated gel system with improved acidity, mesoporous volume and hydroisomerization performance

Synthesis of nano-sized small-crystal and hierarchical SAPO-11 molecular sieves and superior catalytic performance of their NiWS-supported catalysts in hydroisomerization of n-hexadecane

Small-crystal and hierarchical SAPO-11 molecular sieve synthesized via three-stage crystallization method and hydroisomerization performance of corresponding NiWS supported catalyst

Synthesis of Nickel In Situ Modified SAPO-11 Molecular Sieves and Hydroisomerization Performance of Their NiWS Supported Catalysts

Hydroisomerization with a Hierarchical SAPO‐11 Supported Ni Catalyst: Effect of DTAB Content[]**

Hydroisomerization of n-Hexadecane Over Nickel-Modified SAPO-11 Molecular Sieve-Supported NiWS Catalysts: Effects of Modification Methods

Sol-Gel Preparation, Characterization and Hydrogenation Property of Silica Supported Ni Catalyst

Synthesis and Characterization of SAPO-11 Molecular Sieves from Alcoholic Systems

Novel synthesis strategy of SAPO-11 molecular sieve with superior performance for hydroisomerization of long-chain n-alkanes: Supergravity-cyclone assisted hydrothermal crystallization method

Hydroisomerization of Long-Chain Alkane Over Pt/SAPO-11 Catalysts Synthesized from Nonaqueous Media

Preparation and n-hexadecane hydroisomerization properties of SAPO-11-based composite molecular sieve

In Situ Synthesis of Nb-modified AFI Topology Molecular Sieve and Its Modulation on the Formantion of High-Efficiency Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Design and Preparation of Efficient Hydroisomerization Catalysts by the Formation of Stable Sapo-11 Molecular Sieve Nanosheets with 10-20 Nm Thickness and Partially Blocked Acidic Sites

The direct synthesis of Ni/SAPO-11 hydroisomerization catalyst via a novel two-step crystallization strategy

Advances in SAPO-11 molecular sieve in alkane isomerization

Synthesis and hydrogen isomerization performance of ordered mesoporous nanosheet SAPO-11 molecular sieves

Deep Hydroisomerization of n-Hexadecane over NiWS/SAPO-11 Catalyst: Size Effect of the Support and Revelation of the Reaction Network

Optimization of the pore structure and acidity of SAPO-11 for highly efficient hydroisomerization on the long-chain alkane

Synthesis and Application of SAPO-11 Molecular Sieves Prepared from Reaction Gels with Various Templates in the Hydroisomerization of Hexadecane

Improvement of Catalytic Properties of SAPO-11 Molecular Sieves Synthesized in H2O–CTAB–butanol System

Synthesizing hierarchically porous SAPO-11 with polyvinyl alcohol phosphates as mesopore template: effects of phosphorus content and concentration of templates