Abstract:The tandem CO2 hydrogenation to hydrocarbons over mixed metal oxide/zeolite catalysts (OXZEO) is an efficient way of producing value-added hydrocarbons (platform chemicals and fuels) directly from CO2via methanol intermediate in a single reactor. In this contribution, two MAPO-18 zeotypes (M = Mg, Si) were tested and their performance was compared under methanol-to-olefins (MTO) conditions (350 °C, PCH3OH = 0.04 bar, 6.5 gCH3OH h-1 g-1), methanol/CO/H2 cofeed conditions (350 °C, PCH3OH/PCO/PH2 = 1:7.3:21.7 bar, 2.5 gCH3OH h-1 g-1), and tandem CO2 hydrogenation-to-olefin conditions (350 °C, PCO2/PH2 = 7.5:22.5 bar, 1.4-12.0 gMAPO-18 h molCO2-1). In the latter case, the zeotypes were mixed with a fixed amount of ZnO:ZrO2 catalyst, well-known for the conversion of CO2/H2 to methanol. Focus was set on the methanol conversion activity, product selectivity, and performance stability with time-on-stream. In situ and ex situ Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), solid-state nuclear magnetic resonance (NMR), sorption experiments, and ab initio molecular dynamics (AIMD) calculations were performed to correlate material performance with material characteristics. The catalytic tests demonstrated the better performance of MgAPO-18 versus SAPO-18 at MTO conditions, the much superior performance of MgAPO-18 under methanol/CO/H2 cofeeds, and yet the increasingly similar performance of the two materials under tandem conditions upon increasing the zeotype-to-oxide ratio in the tandem catalyst bed. In situ FT-IR measurements coupled with AIMD calculations revealed differences in the MTO initiation mechanism between the two materials. SAPO-18 promoted initial CO2 formation, indicative of a formaldehyde-based decarboxylation mechanism, while CO and ketene were the main constituents of the initiation pool in MgAPO-18, suggesting a decarbonylation mechanism. Under tandem CO2 hydrogenation conditions, the presence of high water concentrations and low methanol partial pressure in the reaction medium led to lower, and increasingly similar, methanol turnover frequencies for the zeotypes. Despite both MAPO-18 zeotypes showing signs of activity loss upon storage due to the interaction of the sites with ambient humidity, they presented a remarkable stability after reaching steady state under tandem reaction conditions and after steaming and regeneration cycles at high temperatures. Water adsorption experiments at room temperature confirmed this observation. The faster activity loss observed in the Mg version is assigned to its harder Mg2+-ion character and the higher concentration of CHA defects in the AEI structure, identified by solid-state NMR and XRD. The low stability of a MgAPO-34 zeotype (CHA structure) upon storage corroborated the relationship between CHA defects and instability.

Two-Step Dry Gel Method Produces MgAPO-11 with Low Aspect Ratio and Improved Catalytic Performance in the Conversion of Methanol to Hydrocarbons

Direct synthesis of shaped MgAPO-11 molecular sieves and the catalytic performance in n -dodecane hydroisomerization

A High-Efficiency and Low-Cost Solid-State Synthesis Strategy for Fabricating (Mg)alpo-11 Zeotypes with Excellent N-Hexadecane Hydroisomerization Performance

Dry-gel conversion synthesis of SAPO-14 zeolites for selective conversion of methanol to propylene

Synthesis and Characterization of Magnesium-Substituted Aluminophosphate Molecular Sieves (Mgapo-11) and Their Kinetic Study of Catalytic Cracking of N-Hexane

Optimization of the pore structure and acidity of SAPO-11 for highly efficient hydroisomerization on the long-chain alkane

Shape-selective catalysts of Mg2+ ion exchange modified SAPO-11 molecular sieves for alkylation of 2-methylnaphthalene

Catalyst consisting of Ag nanoparticles anchored on amine-derivatized mesoporous silica nanospheres for the selective hydrogenation of dimethyl oxalate to methyl glycolate

Methanol Conversion on SAPO-34 Catalysts Synthesized by Tri-templates

Ag/MCM-41 As a Highly Efficient Mesostructured Catalyst for the Chemoselective Synthesis of Methyl Glycolate and Ethylene Glycol

Hydroisomerization of Long-Chain Alkane Over Pt/SAPO-11 Catalysts Synthesized from Nonaqueous Media

Novel method for gel preparation of amine-templated SAPO-34: fractured crystals for enhanced methanol-to-olefin catalysis

Boosting Catalytic Combustion of Ethanol by Tuning Morphologies and Exposed Crystal Facets of α-Mn2O3

Cobalt-silver catalyst with low metal content for highly efficient synthesis of methyl glycolate through synergistic effect

Design and Preparation of Efficient Hydroisomerization Catalysts by the Formation of Stable Sapo-11 Molecular Sieve Nanosheets with 10-20 Nm Thickness and Partially Blocked Acidic Sites

The influence of Mg/Al molar ratio on the performance of CuMgAl-x catalysts for CO2 hydrogenation to methanol

Tailoring Facets of α-Mn 2 O 3 Microcrystalline Catalysts for Enhanced Selective Oxidation of Glycerol to Glycolic Acid

Transitioning from Methanol to Olefins (MTO) toward a Tandem CO2 Hydrogenation Process: On the Role and Fate of Heteroatoms (Mg, Si) in MAPO-18 Zeotypes

Hierarchically structured SAPO-5 molecular sieve catalysts with tailored mesoporosity for alkylation reaction

Excess soluble alkalis to prepare highly efficient MgO with relative low surface oxygen content applied in DMC synthesis

Novel Flower‐Like Ag‐SiO2‐MgO‐Al2O3 Material: Preparation, Characterization and Catalytic Application in Methanol Dehydrogenation