Pouring and Curing for Sample Preparation Technology for the Analysis of the Silicon-Aluminum Ratio of Molecular Sieves by Energy Dispersive X-Ray Fluorescence (EDXRF)
Qing ShanYangxue LuoXinlei ZhangZhanpeng ZhangWenbao JiaYongsheng LingDaqian HeiJiandong ZhangChao ShiJiehua Baoa Department of Nuclear Science and Technology,College of Material Science and Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing,Chinab Hikvision Research Institute,Hangzhou,Chinac School of Nuclear Science and Technology,Lanzhou University,Lanzhou,Chinad School of Materials Science and Engineering,Nanjing Institute of Technology,Nanjing,Jiangsu Province,China
DOI: https://doi.org/10.1080/00032719.2023.2301045
2024-01-12
Analytical Letters
Abstract:The silicon-aluminum ratio of the molecular sieves is a crucial control index for the quality of synthetic molecular sieves. Here a fast, simple and reliable sample preparation method, referred to as pouring and curing method, is described for determining the silicon-aluminum ratio of high silicon molecular sieves by energy dispersive x-ray fluorescence (EDXRF). Resin is used as the carrier with the addition of a curing agent, so that the sample powder is embedded in the resin matrix. By measuring sixteen random positions of the same cured sample, the homogeneity of the sample was evaluated to ensure the stability of the results. A double logarithmic calibration curve of the analysis line ratio and the corresponding concentration ratio of silicon and aluminum was established according to the binary ratio method. The results by EDXRF and inductively coupled plasma-optical emission spectrometer (ICP-OES) were compared with a relative standard error from 2.934 to 6.777%. The good precision shows that the pouring and curing method is a suitable for measuring the silicon-aluminum ratio of molecular sieves.
chemistry, analytical