Abstract:Experiments have been carried out to separate elements of magnesium and lithium from seawater to produce a lithium concentrate product that is free of magnesium through sodium silicate precipitation processes. In this study, the sample used was seawater taken from the Ancol Lagoon Area, North Jakarta. The sea water used contains 0.1674 ppm lithium ions and 1761 ppm magnesium ions with a high Mg/Li ratio of 10521. The seawater containing high levels of magnesium is not suitable as a raw material for for the manufacture of lithium carbonate (battery active ingredient) prior to initial processing. The research variable was the volume of sodium silicate solution added by 10 ml, 20 ml, 30 ml, 40 ml, 50 ml, 60 ml, 70 ml, and 100 ml which were equivalent to 13%, 27% 40%, 53%, 67%. , 80 %, 93%, and 107% stoichiometry of magnesium ion and the technique of adding sodium silicate solution included a single stage and multi-stages. From the experimental results, it can be seen that the most effective addition of sodium silicate is the addition of 80% stoichiometry. The sodium silicate precipitation process succeeded in separating magnesium ions and lithium ions from seawater as indicated by a decrease in the Mg/li ratio from 10521 to 64. The obstacle in this study was that there were still many lithium ions that were also precipitated with magnesium silicate during the precipitation process so that the lithium lost in the filtrate reached 82.26% in the single stage process. Therefore, a multi-stage process was carried out with 6 stages of the process that the addition of sodium silicate for each stage was 1/6 of the volume of sodium silicate solution at single stage optimum conditions. The results obtained from the multi-stage process were able to reduce the lithium ion lost in the filtrate to 76.54%. From the results of the study, it can be concluded that efforts to reduce the percentage of lithium ions lost in the filtrate product need to be carried out through the development of a sodium silicate precipitation process.

The Effect of pH and Sodium Silicate Dosage on the Separation of Magnesium and Lithium from Artificial Brine Water Using Chemical Precipitation Techniques

EFFECTIVENESS OF THE SEPARATION OF MAGNESIUM AND LITHIUM FROM SEAWATER WITH SODIUM SILICATE PRECIPITATION PROCESS

Separation of Magnesium and Lithium from Brine Water and Bittern Using Sodium Silicate Precipitation Agent

Separation of magnesium from lithium in salt-lake brine through struvite precipitation

Specific capture of magnesium ions by phosphorus atomic sites on self-floating nuclei advances Mg/Li separation in salt lakes brine

Separation Study of Magnesium–Lithium from Low‐Mg/Li Brine

Integrated separation of precipitation and three-liquid-phase extraction for boron, lithium and magnesium from salt lake brine with high magnesium-lithium ratio

Extraction of magnesium from salt pond waste with low lithium grade using sodium silicate reagent

Highly Efficient Separation of Magnesium and Lithium and High-Valued Utilization of Magnesium from Salt Lake Brine by a Reaction-Coupled Separation Technology

Separation of magnesium and lithium by solvent extraction using di-(2-ethylhexyl) phosphoric acid(D2EHPA)

Magnesium ion effect in the process of lithium migration in salt lake

Study on Lithium Extraction from Salt Lake Brines

Selective Separation of Lithium from High Mg/Li Ratio Brine Using Single-Stage and Multi-Stage Selective Electrodialysis Processes

Synthesis of functional ionic liquids with high extraction rate and electroconductivity for lithium-magnesium separation and metallic magnesium production from salt lake brine

Lithium and Magnesium Separation from Salt Lake Brine by Tributyl Phosphate under Action of Co-Extraction Reagent Clo4-

Ionic liquid-assisted selective lithium extraction from magnesium-rich brines containing various alkali metals: Experimental and molecular insights

Extraction of lithium from brines with high Mg/Li ratio by the crystallization-precipitation method

Efficiently separating Li+ and Mg2+ from brine and directly preparing Li3PO4 by a combination of electrochemical intercalation/deintercalation and MgNH4PO4 precipitation

Alkaline Resins Enhancing Li+/H+ Ion Exchange for Lithium Recovery from Brines Using Granular Titanium-Type Lithium Ion-Sieves

Separation of Magnesium and Lithium Ions Utilizing Layer-by-Layer Polyelectrolyte Modification of Polyacrylonitrile Hollow Fiber Porous Membranes

Lithium extraction from salt lake brines with high magnesium/lithium ratio: a review