Abstract:An important goal of materials genome initiative program is to build the calculation model and to establish the database of physical properties of the materials, aiming to shorten the development period of the materials, reduce the cost of research and development in material and accelerate the production of new material. Although the existing model has been available for the calculation of pure component's thermal expansion coefficient, a proper model to deal with metal solid solution's thermal expansion coefficient is still lacking. Here, based on the calculation of phase diagram method (CALPHAD method), a model of the thermal expansion coefficient of solid solution containing ferromagnetic-paramagnetic transition was constructed by modifying the traditional heat capacity model and adding extra magnetic item. The experimental data of Ni-Fe binary system were used to assess the model parameters by Levenberg-Marquardt method. The interaction parameters in the temperature range of 300 similar to 1200 K were obtained after the assessment. Using assessed parameters, the thermal expansion coefficient of Ni-Fe binary alloy were calculated. Results indicate the sharp peak around Curie's temperature precisely. The height of the peak gradually decreased as increasing Fe content and the shape of the thermal expansion curve changed from a peak into a valley, which were in agreement with the experimental data. This model can precisely predict the thermal expansion coefficient of any Ni-Fe binary alloy when the Fe content is less than 50wt%. This work provided a general calculation model for the thermal expansion coefficient in metal solid solution, and obtained the basic CALPHAD database of thermal expansion coefficient for Ni-Fe binary system, which can provide theoretical guidance for the design of low-expansion superalloy and also pave the way to establish the physical properties database of multi-element metal solid solution in the future.

Calculation of phase diagram and its application

First-Principles Calculations and CALPHAD Modeling of Thermodynamics

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

CALPHAD as a powerful technique for design and fabrication of thermoelectric materials

Thermodynamic Calculation Of Phase Diagram And Phase Stability With Nano-Size Particles

Application Research on Thermo Calc Software in Two ele men t Phase Diagram

The High-dimensional Phase Diagram and the Large CALPHAD Model

Thermodynamic Basis and Related Phase Equilibria for In-Na and In-Ca Binary Systems

A thermodynamic description of the Al–Fe–Si system over the whole composition and temperature ranges via a hybrid approach of CALPHAD and key experiments

Thermo-mechanical fedamo based calculations of hea (Fe-Ni-Cx (X=0.3-0.5) ternary alloys system using Calphad method

From Zero Kelvin Upwards: Thermodynamic Modeling of the Mn-Ni System with Third Generation Calphad Models

CALPHAD Model Calculation of Thermal Expansion Coefficient in Metal Solid Solution

The CALPHAD approach for HEAs: Challenges and opportunities

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Development and Applications of a Thermodynamic Database for Multicomponent Cu Alloys

Experimental Investigation and Thermodynamic Calculations of the Co-Fe-Ti System

Thermodynamic Descriptions of the Cu–Zn System

Thermodynamic Description of the Cu–Sn System

CALPHAD-type Modeling of the C–Hf–Mo System over the Whole Composition and Temperature Ranges

CALPHAD Modeling of High-Entropy Alloys

Calculation of Phase Diagrams and Solidification Paths of Al-rich Al−Li−Cu Alloys