Abstract:A wax oil hydrocracking process unit with annual capacity of 1.5 million tons in a refinery was simulated using Aspen Plus. The unit included single segment series,cold high pressure column, and light hydrocarbon absorber vacuum tower. Based on the basic production data of wax oil hydrocracking units,Aspen Plus software was used to establish a strict mathematical model for each module in the process. By adjusting the model parameters,the simulation results and calibration data were in a good agreement. Then thermodynamic parameters of different streams were obtained from the simulation. Based on the simulation,the "bottleneck" of the heat exchanger network for the process was identified using pinch analysis.,With the premise of not changing the main equipment of the system,the tuning and simulation of the existing heat exchanger network were achieved for the energy-saving program. The effective energy analysis method was also used to evaluate the heat exchange network before and after the reformation. After the tuning,the amount of hot utility was the 25709kW that is 42.2% less than original process;the amount of cold utility was 29863kW that was 38.5% less than the original process. Overall,the transformation program would save energy 17.19kgEO/t total exergy loss of the heat exchanger network would be reduced to 8477kW from 13530kW with the total exergy loss decreased by 37.35%.

Optimization of heat exchange network in a wax oil hydrotreating unit on the basis of exergy analysis

Optimization and reformation of heat exchanger network for wax oil hydrocracking unit by pinch technology and exergy analysis

Efficient Strategy for the Synthesis of Work and Heat Exchange Networks

Targeting and Design of Work and Heat Exchange Networks

Improvement of Thermal Performance of Novel Heat Exchanger with Latent Heat Storage

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

Retrofit and Optimisation for A Vacuum Gas Oil Hydrotreating System Based on Exergy Load Distribution Analysis

Heat exchange network retrofit of an aromatics extraction process

Optimization on Energy Saving in Ketone-Benzol Dewaxing & Deoiling System

Optimization and analysis for heat exchanger network of propane dehydrogenation plant by using pinch technology

Synthesis of flexible heat exchanger network based on Heuristic Approach

Graphical pinch analysis-based method for heat exchanger networks retrofit of a residuum hydrogenation process

Optimization of Hydrogen Distribution Network Considering Pressure and Heat Recovery

Optimization of energy-saving distillation system of absorption heat pump based on intermediate heat exchange

Thermodynamic principle based work exchanger network integration for cost-effective refinery hydrogen networks

Investigation of heat transfer Exergy loss number and its application in optimization for the shell and helically coiled tube heat exchanger

Simulation of a Wax Oil Hydrotreating Unit and Calculations of Hydrogen Consumption at Off-Design Conditions

Integration of Energy Saving and Emission Reduction of an Acetone-Benzol Dewaxing Device

An engineering target-oriented multi-scenario heat exchanger network retrofit methodology with consideration of exergoeconomic assessment

Integrated Analysis and Optimization of Ethylbenzene Dehydrogenation Unit for Styrene Production

Energy efficiency analysis and optimization of heat exchange network under the goal of "double carbon": a case for production process of isopropyl acetate