Abstract:Minimizing hydrogen consumption in hydrotreating (HDT) units is increasingly important as more heavy and sour crude oil are processed in refineries. A fluid catalytic cracking (FCC) unit commonly links the vacuum gas oil HDT unit with the cracked diesel and the cracked gasoline HDT units. In the course of processing, undesired impurities, such as sulfur, nitrogen and aromatics, pass from the upstream HDT unit, to the FCC unit where they are cracked, and then to the downstream HDT units. As impurity removal can be accomplished in the upstream and downstream HDT units, it is important to understand how the interconnecting FCC unit affects impurity distributions of the adjacent HDT units when minimizing the hydrogen consumption of the whole hydrogen network. A stepwise optimization strategy, using three mathematical models (designated M1, M2 and M3), is proposed to minimize the hydrogen consumption considering impurity distributions within the FCC unit and hydrogenation reaction kinetics. By integrating the FCC unit, M1 is used to investigate the effects of the FCC unit on the upstream and downstream HDT units’ purification degrees and their hydrogen consumption. Based on the hydrogenation reaction kinetics, M2 is used to optimize the operating conditions and to minimize hydrogen consumption within the HDT units according to optimal purification degrees as established by M1. M3 is a hydrogen network optimization model, which is used to obtain the optimal structure of the hydrogen network. Eco-indicator 99 was employed to evaluate the environmental impacts of the hydrogen network. Results show that the hydrogen consumption, the total annual cost (TAC) and the environmental impacts of the hydrogen network are reduced by 44.5%, 34.4% and 38.6%, respectively, compared to the original operation. Optimization without considering the FCC unit and the hydrogenation reaction kinetics only reduced by 32.6%, 19.1% and 28.2% in the hydrogen consumption, TAC and the environmental impacts. Consequently, the effects of the FCC unit and the hydrogenation reaction kinetics should be considered when optimizing the hydrogen network in a refinery.

Simulation of a Wax Oil Hydrotreating Unit and Calculations of Hydrogen Consumption at Off-Design Conditions

Modeling, Simulation and Optimization of a Whole Industrial Catalytic Naphtha Reforming Process on Aspen Plus Platform

Simulation of Industrial Catalytic Reforming Process by Developing User's Module on ASPEN PLUS Platform

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

Development and Application of Industrial Catalytic Cracking Process Online Calculation

Simultaneous Optimization Of Hydrogen Network With Desulfurization Processes Embedded

Hydrogen Sulfide Removal Process Embedded Optimization of Hydrogen Network

Integration Strategies of Hydrogen Network in a Refinery Based on Operational Optimization of Hydrotreating Units

Simulation-based Optimization and Design of Refinery Hydrogen Networks with Hydrogen Sulfide Removal

Simulation-based Modeling and Optimization for Refinery Hydrogen Network Integration with Light Hydrocarbon Recovery

Developing an Approach for Calculating Theoretical Minimum Hydrogen Consumption during Catalytic Hydrotreating of Diesel

Optimization and reformation of heat exchanger network for wax oil hydrocracking unit by pinch technology and exergy analysis

Analysis on the Energy-saving Potential of Refinery Units by Theoretical Consumption

Optimization of heat exchange network in a wax oil hydrotreating unit on the basis of exergy analysis

Coupling Pinch Analysis and Rigorous Process Simulation for Hydrogen Networks with Light Hydrocarbon Recovery

Hydrogen Network Optimization by Integrating Impurity Distributions of a Fluid Catalytic Cracker and Hydrogenation Reaction Kinetics

Simulation and optimization of hydrogen separation from hydrogenation tail gas by hydrate-membrane coupled method

Simulation of Reaction Pathways of Sulfur Compounds and Product Properties Based on the Molecular-Level Hydrotreating Reaction Model

Effect of Feed Properties on Product Distribution from the Modeling of an Industrial Hydrocracking Process

Operational Optimization of a Hydrotreating System Based on Removal of Sulfur Compounds in Hydrotreaters Coupled with a Fluid Catalytic Cracker