Abstract:Improving the energy efficiency in heat exchanger networks (HENs) remains a significant industrial problem, specifically in energy-intensive operations. A particular method for such an objective is the modification of HENs at the equipment-use level, where structural changes take place and units within the network are moved, replaced and/or removed. This practice is usually known as retrofit. The objective of a retrofit is to maximize the heat recovery using the minimum modifications possible and minimum retrofit cost. Traditional retrofit techniques would normally consider one type of heat exchanger (based on the original network) with no additional design features (i.e., heat transfer enhancement technologies). The expansion of such alternatives is limited by practical use and availability of theoretical methods. In this context, the inclusion of high-performance heat exchangers such as plate heat exchangers (PHEs) has not been widely explored, even when their design and operational advantages are known. In this work, a new step-by-step automated HENs retrofit approach based on Pinch Analysis is proposed. The approach is possible to identify the best modification, its location within the network, and its cost simultaneously. Moreover, to increase energy savings, this work presents a strategy that seeks to utilize high efficiency heat exchangers such as plate heat exchangers for retrofit. A distinctive feature of this new method is the ability to handle different minimum approach temperatures, given the different types of exchangers, within the optimization of HENs. Three cases are studied using this methodology to quantify the potential benefits of including PHEs in HEN retrofits, via the analysis of the retrofit cost. Results are compared with a baseline consisting in the same network, where only Shell-and-Tube-Heat-Exchangers (STHXs) are used. In addition, the results demonstrate that this methodology is flexible enough to be applied in a wide range of retrofit problems.

Synthesis of flexible heat exchanger network based on Heuristic Approach

Efficient Strategy for the Synthesis of Work and Heat Exchange Networks

New Transshipment Type MINLP Model for Heat Exchanger Network Synthesis

New Insights into T–H/H–F Diagrams for Synthesis of Heat Exchanger Networks Inside Heat Integrated Water Allocation Networks

Targeting and Design of Work and Heat Exchange Networks

A simultaneous optimization of a flexible heat exchanger network under uncertain conditions

Integrated synthesis and control of heat exchanger networks with dynamic flexibility consideration

Optimal Process Design for Recovering Effluent Gas at Subambient Temperature

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

Globally Optimal Design of Intensified Shell and Tube Heat Exchangers Using Complete Set Trimming

Optimization-based framework for the synthesis of heat exchanger networks incorporating controllability

Heat exchanger network optimisation considering different shell-side flow arrangements

Globally optimal simultaneous heat exchanger network synthesis and basic heat exchanger design

A Novel Step-by-Step Automated Heat Exchanger Network Retrofit Methodology Considering Different Heat Transfer Equipment

An engineering target-oriented multi-scenario heat exchanger network retrofit methodology with consideration of exergoeconomic assessment

A novel two-step synthesis method with weakening strategy for solving large-scale heat exchanger networks

Optimization and utilities relocation approach for the improvement of heat exchanger network designs

A new methodology for simultaneous optimization of capital and operating cost targets in heat exchanger network design

Optimal heat exchanger network synthesis with the detailed heat transfer equipment design

Heat exchanger network retrofit by a shifted retrofit thermodynamic grid diagram-based model and a two-stage approach

A New Computer-Aided Optimization-Based Method for the Design of Single Multi-Pass Plate Heat Exchangers