Abstract:The use of surfactants represents a viable strategy to boost the removal yield of Dense Non-Aqueous Phase Liquids (DNAPLs) from groundwater and to shorten the operational timing of the remediation process. Surfactants, in general, help in reducing the interfacial tension at the DNAPL/water interface and enhance the solubility of the pollutant in the water phase through the formation of dispersed systems, such as micelles and emulsions. In this paper, we show that a suitable choice of a surfactant, in this case belonging to the bio-degradable class of ethoxylated alcohols, allows for the formation of hydrodynamic interfacial instabilities that further enhances the dissolution rate of the organic pollutant into the water phase. In a stratified configuration (denser organic phase at the bottom and lighter water phase on top), the instabilities appear as upward-pointing fingers that originate from the inversion of the local density at the interface. This inversion stems from the synergetic coupling of two effects promoted by the ethoxylated surfactant: i) the enhanced co-solubility of the DNAPL into the water (and viceversa), and (ii) the differential diffusion of the DNAPL and the surfactant in the aqueous phase. By dissolving into the DNAPL, the surfactant also reduces locally the surface tension at the liquid-liquid interface, thereby inducing transversal Marangoni flows. In our work, we carefully evaluated the effects of the concentration of different surfactants (two different ethoxylated alcohols, sodium dodecylsulphate, cetyltrimethyl ammonium bromide, N-tetradecyl-N, N-dimethylamine oxide and bis(2-ethylhexyl) sulfosuccinate sodium salt) on the onset of the instabilities in 3 different DNAPLs/water stratifications, namely chloroform, trichloroethylene and tetrachloroethylene, with a special emphasis on the trichloroethylene/water system. By means of a theoretical model and nonlinear simulations, supported by surface tension, density and diffusivity measurements, we could provide a solid explanation to the observed phenomena and we found that the type of the dispersed system, the solubility of the DNAPL into the water phase, the solubility of the surfactant in the organic phase, as well as the relative diffusion and density of the surfactant and the DNAPL in the aqueous phase, are all key parameters for the onset of the instabilities. These results can be exploited in the most common remediation techniques.

Surfactant-enhanced Removal of Hydrophobic Oils from Source Zones

Laboratory Evaluation of the Use of Solvent Extraction for Separation of Hydrophobic Organic Contaminants from Surfactant Solutions During Surfactant-Enhanced Aquifer Remediation

A pore-scale investigation of heavy crude oil trapping and removal during surfactant-enhanced remediation

Surfactant-enhanced remediation of oil-contaminated soil and groundwater: A review

Expanded Salinity Window of Middle-Phase Microemulsions and Reduced Surfactant Adsorption by Hydrotrope

Oil solubilization in sodium dodecylbenzenesulfonate micelles: New insights into surfactant enhanced oil recovery

Emulsification and interfacial characteristics of different surfactants enhances heavy oil recovery: experimental evaluation and molecular dynamics simulation study

New insights into the mechanism of surfactant enhanced oil recovery: Micellar solubilization and in-situ emulsification

Novel Anionic–Nonionic Surfactant Based on Water–Solid Interfacial Wettability Control for Residual Oil Development

Separate Reclamation of Oil and Surfactant from Oil-in-Water Emulsion with a CO 2 -Responsive Material

Surfactant- and Aqueous-Foam-Driven Oil Extraction from Micropatterned Surfaces

Zwitterionic-nonionic compound surfactant system with low chromatographic separation effect for enhanced oil recovery

Hydrodynamically-enhanced transfer of dense non-aqueous phase liquids into an aqueous reservoir

Solvent Extraction for Separating Micellar-Solubilized Contaminants and Anionic Surfactants

Rapid design and optimization of complex surfactant microemulsions for high-efficiency oil extraction processes integrating experimental and modeling approaches

Reverse-micellar Extraction for Micellar-Solubilized Contaminant and Surfactant Removal

Enhancing oil–solid and oil–water separation in heavy oil recovery by CO 2 ‐responsive surfactants

Desorption of hydrocarbon chains by association with ionic and nonionic surfactants under flow as a mechanism for enhanced oil recovery

EOR mechanism of fracture oil displacement agent for ultra-low permeability reservoir

Experimental investigation of new derived anionic natural surfactant from peanut oil: Application for enhanced oil recovery

Detergency and its implications for oil emulsion sieving and separation