Experimental investigation of new derived anionic natural surfactant from peanut oil: Application for enhanced oil recovery

Sarkar Muheedin Hama,Abbas Khaksar Manshad,Jagar A. Ali
DOI: https://doi.org/10.1016/j.molliq.2023.123876
IF: 6
2024-01-10
Journal of Molecular Liquids
Abstract:Nowadays, there is a growing inclination towards the environmentally friendly and economically viable materials in the field of chemical enhanced oil recovery including the surfactant flooding. This study investigates the performance of a newly developed anionic surfactant derived from peanut oil in enhanced oil recovery (EOR) applications. The validity of the formulated surfactant using the esterification and sulfonation methods was verified through FTIR, 1 H NMR, and TGA analytical techniques. According to the outputs of conductivity and surface tension from developed surfactant solutions at 500 and 4000 ppm, the concentration of 2000 ppm was identified as the critical micelle concentration (CMC). Several experimental tests were applied on the surfactant solutions and more specifically at CMC range, such as IFT measurement, wettability estimation, foamability, oil displacement and emulsification. The surfactant solution at CMC (optimal surfactant solution) reduced the IFT from an initial value of 15.5 to 6.8 × 10 −2 mN/m at the optimum concentration of formation water (15,000 ppm). Wettability alteration was examined on sandstone and carbonate rock samples, and the optimal surfactant solution successfully altered both rock surfaces from strongly oil-wet to water-wet, resulting in a decrease in contact angle from 144° to 58° on carbonate rock and from 138° to 44° on sandstone rock. In addition, the emulsion test results revealed a significant ability of the peanut surfactant to create emulsions. Examination of microscopic images demonstrated that the emulsion remained stable for approximately 90 days with a high compatibility under high saline conditions. Hence, the developed natural surfactant enabled to displace extra 19.3 % and 15.64 % original oil in place (OOIP) from the sandstone and carbonate core plugs, respectively, with shifting the relative permeability curves towards the lift side.
chemistry, physical,physics, atomic, molecular & chemical
What problem does this paper attempt to address?