Abstract:Surfactants are widely applied for promoting miscibility and reducing interfacial tension between oil and water phases because of their remarkable amphiphilic morphology. Along with development and popularization of tertiary oil recovery techniques, surfactants play a significant role in crude oil exploitation. Among the various tertiary oil recovery techniques, supercritical CO2-enhanced oil recovery is a promising method for improving oil recovery. However, the establishment of CO2-enhanced oil recovery brought new requirements and challenges to traditional surfactant research and development, especially for molecular design. In this method, the reduction of the minimum miscibility pressure between supercritical CO2 and crude oil is required to achieve miscible flooding-an important means to enhance oil recovery. Therefore, a novel miscible flooding agent that exhibits oil-water miscibility analogous to conventional surfactants is desirable for this method. Meanwhile, a conspicuous difference of polarity matching the high polarity of H2O molecule against low polarity of alkane molecule, which is the essential feature of traditional surfactant, won't suit this case well due to a medium polarity of CO2 molecule. According to previous work done in our laboratory, surfactants with multiple ester groups considerably reduce the minimum miscibility pressure between supercritical CO2 and crude oil. Therefore, inspired by the "oil-water-amphiphilic molecules" design, herein, we replaced the hydrophilic moiety with multiple ester groups and designed a new type of "oil-CO2 amphiphilic molecule" as a miscible flooding agent, which is composed of an alkane tail and multiple ester groups as the lipophilic and CO2-philic groups, respectively. In the strategy based on the proposed agent, the number of ester groups and the length of the alkane tail are the main parameters. In addition, we optimized the molecular structure of the proposed agent, CAA8-X, which comprises cetyl and acetyl sucrose esters as the lipophilic and CO2-philic groups, respectively. We verified that the as-synthesized agent can remarkably reduce the minimum miscibility pressure between supercritical CO2 and various types of oil samples, including kerosene, white oil, and crude oil from the Changqing region. The crude oil-CO2 minimum miscibility pressure reduction ratio was 20.5% as measured by the vanishing interfacial tension method and the slim tube test. In this study, we also established a method called the rising height method to measure the minimum miscibility pressure with significantly reduced time and equipment cost. Furthermore, to demonstrate the mechanism of this miscible flooding agent for CO2-enhanced oil recovery, the affinity between the CO2-philic group and molecular CO2 was investigated via molecular dynamics simulation. The results indicated that the "oil-CO2 amphiphilic molecule" can reduce oil-CO2 interfacial tension because of lower affinity potential energy between the CO2-philic group and molecular CO2.

Enhancing oil–solid and oil–water separation in heavy oil recovery by CO 2 ‐responsive surfactants

CO2-responsive surfactants for greener extraction of heavy oil: A bench-scale demonstration

Emulsification and interfacial characteristics of different surfactants enhances heavy oil recovery: experimental evaluation and molecular dynamics simulation study

CO2-responsive surfactant for oil-in-water emulsification and demulsification from molecular perspectives

Separate Reclamation of Oil and Surfactant from Oil-in-Water Emulsion with a CO 2 -Responsive Material

Simultaneous adjustment on the CO2/oil and CO2/water interface tensions using hydrophilic, lipophilic and CO2-philic surfactants during CO2 flooding to enhance shale oil recovery after hydraulic fracturing

An experimental investigation of liquid CO2-in-water emulsions for improving oil recovery

Research of CO2-Soluble Surfactants for Enhanced Oil Recovery: Review and Outlook

Synergistic Collaboration between a Viscosity Reducer and a Surfactant for in Situ Emulsion Formation to Enhance Heavy-Oil Recovery

A review of surfactants as synergists in the field of enhanced oil recovery

Review of Foam with Novel CO2-Soluble Surfactants for Improved Mobility Control in Tight Oil Reservoirs

Experimental investigation on the effect of interfacial properties of chemical flooding for enhanced heavy oil recovery

Surfactant and a mixture of surfactant and nanoparticles to stabilize CO2/brine foam, control gas mobility, and enhance oil recovery

Zwitterionic-nonionic compound surfactant system with low chromatographic separation effect for enhanced oil recovery

Investigation of synergy between nanoparticle and surfactant in stabilizing oil-in-water emulsions for improved heavy oil recovery

Application and Mechanism of a Novel CO<sub>2</sub>-Oil Miscible Flooding Agent, CAA8-X

Promoting dissolution behaviors of low-carbon alcohol polyoxyethylene polyoxypropylene ether in CO 2 by molecular structure optimization and adding cosolvent

Study on Oil and Gas Amphiphilic Surfactants Promoting the Miscibility of CO2 and Crude Oil

Emulsions synergistic-stabilized by a hydroxyl sulfobetaine surfactant and SiO2 nanoparticles and their potential application for enhanced oil recovery

Novel Anionic–Nonionic Surfactant Based on Water–Solid Interfacial Wettability Control for Residual Oil Development

New insight into CO2 huff-n-puff process for extraheavy oil recovery via viscosity reducer agents: An experimental study