Piezoelectric Ceramic Materials: Processing, Properties, Charcterization, And Applications
Jiri Erhart,Martin Pustka,Petr Pulpan
2010-01-01
Abstract:Piezoelectricity is the ability of certain crystalline materials to develop an electric charge proportional to a mechanical stress, which is called the direct piezoelectric effect discovered by Curie bothers in 1880. Soon it was realized that materials showing this phenomenon must also show the converse piezoelectric effect: a geometric strain/deformation proportional to an applied voltage. Typical crystals (e.g., quartz, tourmaline and Rochelle salt) exhibit the piezoelectric effect. Since its discovery the piezoelectricity effect has found many useful applications, such as the production and detection of sound, generation of high voltages and frequency, microbalances, and ultra fine focusing of optical assemblies. It is also the basis of a number of scientific instrumental techniques with atomic resolution such as the scanning probe microscopy, and everyday uses such as acting as the ignition source for cigarette lighters and push-start propane barbecues. However, the traditional piezoelectric single crystals suffer from the disadvantages such as weak piezoelectric effect, low mechanical strength, sensitivity to moisture, and very narrow operated temperature range. Compared to the traditional single crystals, electrically poled polycrystalline ferroelectric ceramics, such as barium titanate (BaTiO3) and lead zirconium titanate (PZT), offer the advantages of large and stable piezoelectric effects, high strength and ease of fabrication in general, especially into complex shapes and large area pieces. Nowadays, they become the dominant piezoelectric materials in the fields of piezoelectric applications such as actuators, sensors, and transducers in intelligent systems and smart structures, dominating the world market today. Therefore, the aim of this chapter is giving a review of the state of art in polycrystalline piezoelectric ceramic materials, which covers the processing, properties, characterization, and applications of piezoelectric ceramic materials; whereas single crystals, polymeric piezoelectric materials and organic/inorganic piezoelectric composites are outside the scope of this review. This chapter is organized in the following way. In the first part, the history and processing of piezoelectric ceramic materials are briefly introduced, and then the general characteristics of piezoelectric ceramic materials are described with an emphasis on the piezoelectric parameters, compositions and properties, and piezoelectric constitutive relationships. Characterization methods for piezoelectric properties and ferroelectric domain structures of piezoelectric ceramic materials are addressed in the third part. Finally, various applications of piezoelectric ceramic materials in ultrasonic actuators, sensors, transducers, and active vibration controlling, are described, and the personal perspectives towards future trends of piezoelectric ceramic materials are also presented.