Abstract:Taking TC4 Titanium alloy as the object, the effect of high strain rate on the velocity of plastic shock wave was analyzed based on the Johnson-Cook constitutive model. First, the transient transmission of shock wave with different laser shock peening parameters was investigated through three-dimensional finite element method. Second, the mechanism of saturation phenomenon with multiple laser peening was analyzed. Finally, the method of obtain uniform surface residual stress was obtained. Results show that the plastic shock wave velocity during laser peening process is significantly affected by high strain rate effects. Furthermore, the plastic shock wave velocity is inversely proportional to the plastic strain. In the initial stage, the plastic strain increases, and plastic shock wave velocity decreases with increasing laser power density, and thus attenuation gradient of shock wave pressure increases. When the power density keeps constant, the plastic strain and attenuation gradient of laser shock wave decreases with increasing laser peening times, and the residual compressive stress induced by laser shock peening increases. When the impact times increase up to 3 or 4, the attenuation rate is similar and the residual compressive stress will not increase, indicating that the effects of laser shock peening reach saturation. The uniform surface residual stress field can be obtained with the saturation effects when overlapping rate during laser peening process is more than 50%.

Investigation on the non-homogeneity of residual stress field induced by laser shock peening

Research on the Residual Stress Induced by Square-Spot Laser Shock Peening on 2024-T351 Specimens

An Analytical Model To Predict Residual Stress Field Induced By Laser Shock Peening

Sensitivity Analysis and Restraining Method of "Residual Stress Hole" Induced by Laser Shock Peening

Influences Of Shock Wave Transient Transmission On Laser Peened Residual Stress Fields

Effects of Residual Stress Induced by Laser Shock Peening on Mixed-Mode Crack Propagation Behavior in 7075-T6 Aluminum Alloy Panel

Fem Simulation of Residual Stresses Induced by Laser Shock with Overlapping Laser Spots

Investigation on the deformation progress and residual stress of Ti-6Al-4V alloy during laser shock peening

Study on Residual Stress of Laser Shock Processing Based on Numerical Simulation and Orthogonal Experimental Design

A New Effective Method to Estimate the Effect of Laser Shock Peening

Simulation And Experimental Study On Residual Stress Distribution In Titanium Alloy Treated By Laser Shock Peening With Flat-Top And Gaussian Laser Beams

3-D FEM simulation of laser shock processing

Numerical Investigation of Residual Stress Field Induced by Array-Type Laser Shock Peening

Study on the Correlation Between External Plasma Plumes and Stress Distribution Inside a Target Immediately after Surface Laser Loading

Mathematical Model and Quantitative Analysis of Residual Stress Hole During Laser Shock Peening

Dynamic Response and Residual Stress Fields of Ti6al4v Alloy under Shock Wave Induced by Laser Shock Peening

Numerical Simulation of Residual Stress Field for Laser Shock Processing

Study on numerical simulation of residual stresses induced by laser shock processing

Investigation of residual stress distribution in clad 2024 T3 after laser peening

Optimization Of Residual Stresses Induced By Multiple Laser Shock Processing

Numerical analysis on influences of laser shock peening parameters on residual stress distribution for 7075 aluminum alloy