Abstract:CdS nanorods of high aspect ratio were synthesized through the route of chemical bath deposition under a mild condition. Diphenylthiocarbazone (DPTA) was employed as an organic additive for the synthesis of CdS nanorods. The crystalline and microstructure of CdS nanorods were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The XRD patterns indicate the existence of both cubic and hexagonal phases in the samples. The sample with the pH value of 10.5 showed a hexagonal (111) peak of maximum intensity, indicating the preferential orientation along the c axis of hexagonal CdS phase. Meanwhile, the cubic phase appeared at the pH value of 10.5. The TEM images reveal that the morphology of CdS could be controlled by adjusting the pH value. Highly crystalline CdS nanorods with the diameter of about 50 nm and the length of about 3 mu m were obtained at the pH value of 10.5. The effects of the pH value on the formation of CdS nanorods were studied. The electrical properties of the samples were also investigated. The results show that the sample prepared with DPTA as the organic additive exhibited a much lower resistance than those prepared with PVA as the additive and in pure ethanol. There were two big pi bonds in a DPTA molecule, which benefited the electron transfer. Finally, the growth mechanism of CdS nanorods and electron transfer in DPTA modified CdS nanorods were discussed.

Formation Process of Cds Nanorods Via Solvothermal Route

Single crystalline CdS nanorods fabricated by a novel hydrothermal method

Synthesis of Single Crystalline CdS Nanorods by a PVP-assisted Solvothermal Method

Solvothermal Synthesis and Characterization of Uniform CdS Nanowires in High Yield

Phase and Shape Evolution of Cds Nanocrystallites under Solvothermal Conditions

Effects of Preparation Parameters on One-Dimensional Cds Nanostructures by Diphenylthiocarbazone-Assisted Solvothermal Method

Good Optical Properties of Branched CdS Nanoparticles and Its Large Area Growth via Solvothermal Route

Preparation and Growth Mechanism of CdS Nanorods via Chemical Bath Deposition

Surface-roughness-assisted formation of large-scale vertically aligned CdS nanorod arrays via solvothermal method

Self-assembly of CdS: from nanoparticles to nanorods and arrayed nanorod bundles

Effect of Solvents on Morphology and Size of CdS Nanoparticles via a Solvothermal Route

Synthesis of CdS nanotubes by chemical bath deposition

Nonaqueous Synthesis of CdS Nanorod Semiconductor

From 2d Framework to Quasi-1d Nanomaterial: Preparation, Characterization, and Formation Mechanism of Cu3sns4 Nanorods

Diphenylthiocarbazone (Dithizone)-Assisted Solvothermal Synthesis and Optical Properties of One-Dimensional Cds Nanostructures

Controllable Synthesis of Nanocrystalline Cds with Different Morphologies and Particle Sizes by A Novel Solvothermal Process

Solvothermal Growth of Nis Single-Crystalline Nanorods

Solvothermal Route to Cote2 Nanorods

Synthesis of rod-, twinrod-, and tetrapod-shaped CdS nanocrystals using a highly oriented solvothermal recrystallization technique

Synthesis of One-Dimensional Chalcogenides by a Novel Hydrothermal Process

Directional CdS Nanowires Fabricated by Chemical Bath Deposition