Abstract:Nano-scale hydrated ferric oxide (HFO) of high specific surface area and reactivity exhibits specific affinity toward arsenate owing to the abundant surface hydroxyl groups. Nevertheless, the ultrafine particle of nano-HFO tend to agglomerate and thereafter significantly limits its large-scale application in water treatment due to the excessive hydraulic pressure drop and difficult operation from the reaction systems. In comparison with macroporous ion exchangers, gel-type ones are more cost effective, though their utilization as hosts to support nanoparticles is intensively compromised by relatively poor pore structure, high swelling rate and weak mechanical strength. In this study we prepared a nanocomposite adsorbent HFO-201 x 4 via ion exchange/in situ deposition method by using a gel resin-201 x 4 as the host of nano-HFO. The main objective of this study is to compare the structural features, physical and chemical properties of the nanocomposite to a macroporous resin-based nanocomposite HFO-201, and to evaluate their different adsorption property toward As(V). The results indicate that nano-HFO immobilized in HFO-201 x 4 was acicular, quite different from the spherical particles in HFO-201. Other structure properties of both composites, such as crystal form, pore structure, mechanical strength and swelling ratio, are quite similar. The maximum adsorption capacity of HFO-201 x 4 was slightly higher than that of HFO-201, while HFO-201 x 4 exhibited superior adsorption toward trace As(V) over HFO-201 in terms of adsorption capacity and kinetics, possibly arising from higher site density of HFO-201 x 4 (1.47 mmol/g) than HFO-201 (0.88 mmol/g). From the breakthrough curves of two separate fixed beds packed with both composites, the effective working capacity of HFO-201 x 4 was nearly twice of HFO-201. The exhausted HFO-201 x 4 could be efficiently regenerated for cyclic runs. This study demonstrates that gel-type anion exchange resins could serve as promising hosts for fabrication of similar nanocomposite for water decontamination.

Preparation of Polymer-Supported Hydrated Ferric Oxide Based on Donnan Membrane Effect and Its Application for Arsenic Removal

Arsenic Removal in Synthetic Ground Water Using Iron Electrolysis

A Gel Resin-supported Nano-hydrated Iron Oxide for Arsenate Sorption from Water

Arsenate removal from underground water by polystyrene-confined hydrated ferric oxide (HFO) nanoparticles:effect of humic acid

ARSENATE SORPTION BY A NEWLY-DEVELOPED POLYMER-SUPPORTED HYDRATED IRON OXIDE

Arsenate Removal from Aqueous Media by Nanosized Hydrated Ferric Oxide (HFO)-Loaded Polymeric Sorbents: Effect of HFO Loadings

Surface chemistry of polymer-supported nano-hydrated ferric oxide for arsenic removal: effect of host pore structure

Highly efficient removal of heavy metals by polymer-supported nanosized hydrated Fe(III) oxides: behavior and XPS study.

Enhanced removal of As (V) from aqueous solution using modified hydrous ferric oxide nanoparticles

PREPARATION OF IRON-LOADED HYBRID MATERIALS FOR TRACE ARSENIC REMOVAL FROM WATERS

Development of polymer-based nanosized hydrated ferric oxides (HFOs) for enhanced phosphate removal from waste effluents.

Selective and Efficient Removal of As(V) and As(III) from Water by Resin-Based Hydrated Iron Oxide

In-situ preparation of FeCo-Layered double hydroxides modified anion exchange resin D201 for As(V) effective removal from aqueous solutions

Heavy metals removal using hydrogel-supported nanosized hydrous ferric oxide: Synthesis, characterization, and mechanism

Hydrous Ferric Oxide-Resin Nanocomposites of Tunable Structure for Arsenite Removal: Effect of the Host Pore Structure

Cellulose nanocrystal-based polymer hydrogel embedded with iron oxide nanorods for efficient arsenic removal

Efficient As(III) Removal by Macroporous Anion Exchanger-Supported Fe–Mn Binary Oxide: Behavior and Mechanism

Arsenate Adsorption by Hydrous Ferric Oxide Nanoparticles Embedded in Crosslinked Anion Exchanger: Effect of the Host Pore Structure.

Enhanced Arsenite Removal from Silicate-containing Water by Using Redox Polymer-based Fe(III) Oxides Nanocomposite

Synthesis of novel hydrated ferric oxide biochar nanohybrids for efficient arsenic removal from wastewater

Arsenic Adsorption and Removal by a New Starch Stabilized Ferromanganese Binary Oxide in Water.