Abstract:The paper is devoted to the development of a method for obtaining and using iron-containing sorption materials for the effective removal of arsenic compounds of different oxidation states from an aqueous medium. It is known that arsenic compounds have a harmful effect on biota due to high toxicity. The paper theoretically and experimentally substantiates the choice of iron-containing materials as the main sorbent material for arsenic compounds removal from the aqueous medium. A series of iron-containing adsorbents, including powder, activated carbon-based granular and suspension sorbents, was synthesized by different methods (heterogeneous and homogeneous precipitation). Experimental studies have confirmed that the adsorption of arsenate ions on iron-containing sorption materials corresponds to the pseudo-second order of the reaction (R2=0.999), which is inherent in adsorption processes. It was determined that oxyhydroxide sorption materials obtained by the homogeneous precipitation demonstrate higher sorption activity (up to 70 mg/g for As(III) and over 70 mg/g for As(V)). It was found that activated carbon-based iron-containing sorption materials showed approximately 2 times lower efficiency than powder iron(III) oxide, iron(III) oxyhydroxide and amorphous iron(III) hydroxide. It was shown that the use of microfiltration membranes is promising for the removal of spent suspension iron-containing sorption materials. Experimental studies have confirmed that the use of the combination “fine-particle iron(III) oxyhydroxide/membrane” allows removing arsenic compounds from contaminated water to the sanitary requirements level (less than 10 μg As/l) and separating effectively the spent fine-particle sorbent from water

PREPARATION OF IRON-LOADED HYBRID MATERIALS FOR TRACE ARSENIC REMOVAL FROM WATERS

Arsenic Removal in Synthetic Ground Water Using Iron Electrolysis

Preparation of Iron and Manganese Oxides/Carbon Composite Materials for Arsenic Removal from Aqueous Solution

Preparation of Polymer-Supported Hydrated Ferric Oxide Based on Donnan Membrane Effect and Its Application for Arsenic Removal

Application of iron-based materials for removal of antimony and arsenic from water: Sorption properties and mechanism insights

Development of iron-containing sorption materials for water purification from arsenic compounds

Enhanced As (V) Removal from Aqueous Solution by Biochar Prepared from Iron-Impregnated Corn Straw

Arsenic Captured from Drinking Water with Fe-Zr Adsorbents

Preparation and Application of Iron-Based Composite Materials for the Removal of Antimony from Aqueous Solution

Combination of Hydrous Iron Oxide Precipitation with Zeolite Filtration to Remove Arsenic from Contaminated Water

Removal of As(III) from water using modified jute fibres as a hybrid adsorbent

Selective and Efficient Removal of As(V) and As(III) from Water by Resin-Based Hydrated Iron Oxide

A critical review on arsenic removal from water using iron-based adsorbents

ARSENIC REMOVAL FROM HOUSEHOLD DRINKING WATER BY ADSORPTION

A Novel Nanostructured Fe-Ti-Mn Composite Oxide for Highly Efficient Arsenic Removal: Preparation and Performance Evaluation

Synthesis of novel hydrated ferric oxide biochar nanohybrids for efficient arsenic removal from wastewater

Development, Characterization and Evaluation of Iron-Coated Honeycomb Briquette Cinders for the Removal of As(V) from Aqueous Solutions

Disposal of iron-manganese sludge from waterworks and its potential for Arsenic removal

In-situ Forming Sub-2 Nm Hydrous Iron Oxide Particles in MOFs for Deep-Treatment and High Anti-Interference in Arsenic Removal

Treatment of arsenic-contaminated groundwater with a novel iron oxide/carbon composite as the adsorbent

The application and mechanism of iron sulfides in arsenic removal from water and wastewater: A critical review