Abstract:A novel core-shell magnetic composites [Fe3O4@C@FeOx (FCF)] (Fe3O4 as the core and C as the inner shell, FeOx as the outer shell) was prepared by modifying Fe3O4@C magnetic nanoparticles (FC) by amorphous iron oxides to remove As(V) from water. Both the magnetic core (FC) and the amorphous iron oxide shell were all fabricated with Iron-containing water treatment residuals (WTRs), also called iron sludge. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), Brunauer-Emmett-Teller analysis (BET), X-ray photoelectron spectroscopy (XPS) and vibrating sample magnetometer (VSM) were utilized to characterize the FC and FCF. TEM images clearly show that FCF is composed of spherical particles with obvious core-shell structure, and the thickness of carbon shell and amorphous iron oxide shell are 20-35 and 30-50 nm, respectively. With saturation magnetization of 16.30 emu/g, FCF nanoparticles could be easily separated from the solution with a hand held magnet. BET analysis show that the specific surface area of FCF is 122.7 m(2)/g, which is conducive to the adsorption of As(V). The adsorption efficiency of FCF for As(V) is high in a wide range of pH 3-9. Moreover, the adsorption process might be a chemical adsorption according to kinetics fitting analysis of FCF. Both Langmuir and Freundlich model could fit the adsorption data for the FCF at 25 degrees C and 35 degrees C well, and the maximum adsorption capacity of FCF (13.47 mg/g) at 25 degrees C is about 3.29 times of that of FC (3.14 mg/g), which may be due to the large amount of amorphous iron oxides coated on the surface of FCF and its large specific surface area. This study not only provides a new way for the disposal of waste iron sludge, but also supplies a cheap and stable adsorbent for the treatment of arsenic-containing water.

In-situ preparation of FeCo-Layered double hydroxides modified anion exchange resin D201 for As(V) effective removal from aqueous solutions

Significant improvement on selectivity and capacity of glycine-modified FeCo-layered double hydroxides in the removal of As (V) from polluted water

In Situ Forming MnFe2O4/D201 Magnetic Composite Adsorbents for High Selectivity Adsorption and Deep Treatment of As(V) from Wastewater

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Fe<SUP>3+</SUP> coordinated to amino-functionalized spherical mesoporous silica: Preparation, characterization, and application as a rapid and efficient adsorbent for As(V) removal

Removal of As(V) by a Core-Shell Magnetic Nanoparticles Synthesized with Iron-Containing Water Treatment Residuals

Preparation of a spindle -MnO<sub>2</sub>@Fe/Co-MOF-74 for effective adsorption of arsenic from water

Effective As(III) and As(V) Immobilization from Aqueous Solution by Nascent Ferrous Hydroxide Colloids (FHC)

Preparation of a spindle δ-MnO2@Fe/Co-MOF-74 for effective adsorption of arsenic from water

Efficient As(III) Removal by Macroporous Anion Exchanger-Supported Fe–Mn Binary Oxide: Behavior and Mechanism

Microwave-assisted Rapid Synthesis of Fe2O3/ACF Hybrid for High Efficient As(V) Removal

Effective Technique and Mechanism for Simultaneous Adsorption of As(III/V) from Wastewater by Fe-ZIF-8@MXene

Functionalized dithiocarbamate chelating resin for the removal of Co2+ from simulated wastewater

ARSENATE SORPTION BY A NEWLY-DEVELOPED POLYMER-SUPPORTED HYDRATED IRON OXIDE

Development, Characterization and Evaluation of Iron-Coated Honeycomb Briquette Cinders for the Removal of As(V) from Aqueous Solutions

Preparation of Polymer-Supported Hydrated Ferric Oxide Based on Donnan Membrane Effect and Its Application for Arsenic Removal

Efficient Removal of As(V) from Diluted Aqueous Solutions by Fe/La Oxide Magnetic Microspheres

Novel Composite Adsorbents Preparation Through in Situ Coating and Embedded Regeneration for the Simultaneous Removal of As(III) and As(V) from Drinking Water

Selective and Efficient Removal of As(V) and As(III) from Water by Resin-Based Hydrated Iron Oxide

Removal of As(III) and As(V) from Water Using Iron Doped Amino Functionalized Sawdust: Characterization, Adsorptive Performance and UF Membrane Separation

Removal of arsenic(v) from aqueous solutions using sulfur-doped Fe3O4 nanoparticles.