Abstract:Electrochemical behavior of LiFePO4/C cathode material synthesized by ballmilling technique from a mixture of Fe powder, FePO4 center dot 4H2O, Li3PO4 center dot 1/2H(2)O, and sucrose was studied in half-cells using lithium metal as anode. The prepared LiFePO4/C cathode material exhibits excellent rate capability with initial discharge capacities of 141 mAh/g (1 C ), 127 mAh/g (2 C), 119 mAh/g (3 C), and 109 mAh/g (5 C), respectively. Good cycling performance under 2 C charge-discharge rate could be obtained at room temperature with a discharge capacity of 125-131 mAh/g for 300 cycles. Impedance spectroscopy was applied to investigate the material behavior during the 2 C rate charge-discharge cycling. It is found that the Nyquist plots of the cycled lithium cell at discharged state are comprised of one or two semicircles in high-to-medium frequency range followed by an inclined line in low-frequency range. The first semicircle at higher frequency shows close relationship with the cycling performance of the lithium cell. Thus, it may be used to predict the cycle life of the LiFePO4/C cathode. Through a combined X-ray diffraction (XRD) analysis and scanning electron microscope observation on the LiFePO4/C cathode upon the 2 C rate cycling, we correlated the observed capacity fading after 300 cycles at 2 C charge-discharge rate with the LiFePO4 particle cracking and the increase of particle contact resistance. No significant phase change of LiFePO4/C was observed even after 800 cycles according to the XRD patterns. (c) 2005 The Electrochemical Society.

Temperature Sensitivity to Capacity of Lifepo4-Based Cathode Materials and Ac Impedance Analysis

Effects of temperature on electrochemical impedance spectroscopy of the LiFePO4 battery

Impedance Parameters Arrhenius Properties Analysis for Lithium Ion Batteries

Effects of temperature on charge/discharge behaviors of LiFePO 4 cathode for Li-ion batteries

Electrochemical Performance Study of Lifepo4 Cathode Material with Different Carbon Coating Contents

Study on the Effects of Temperature on LiFePO4 Battery Life

The Influence of Temperature on the Capacity of Lithium Ion Batteries with Different Anodes

One-Step Solid-State Synthesis And High-Temperature Electrochemical Performance Of Carbon Coated Lifepo4 Cathode

Electrochemical Performance and Kinetics of LiFePO4/C Cathode in a Low-Temperature Electrolyte

Particle size sensitivity of electrochemical performance for hydrothermally synthesized LiFePO4/C cathode material

Insight into Intermediate Impact of Aging Acidity and Regulating Mechanism on the Performance of LiFePO4/C Cathode Material

Temperature Characteristics of Power LiFePO4 Batteries

Experimental Study on Influence of Temperature and C-Rate of Discharge on Performance of In-House-Fabricated 30-Ah Li-Ion Prismatic Cell Made With Lithium Iron Phosphate and MCMB

Synthesis, characterization and properties of LiFePO4/C cathode material

Impedance Studies on the Capacity Fading Mechanism of Li(Ni0.5Co0.2Mn0.3)O2Cathode with High-Voltage and High-Temperature

EVS 25 Shenzhen , China , Nov 5-9 , 2010 Electrochemical performance and kinetics of LiFePO 4 / C cathode in a low-temperature electrolyte

Electrochemical Behavior Of Lifepo4/C Cathode Material For Rechargeable Lithium Batteries

Effects of Carbon Coating and Metal Ions Doping on Low Temperature Electrochemical Properties of LiFePO4 Cathode Material

Investigation of Lithium Content Changes to Understand the Capacity Fading Mechanism in LiFePO4/graphite Battery

Effect of Synthesis Temperature on the Structure and Electrochemical Performances of LiFePO4/C

The Low and High Temperature Electrochemical Performances of Li3V2(PO4)3/C Cathode Material for Li-ion Batteries