Abstract:LiFePO4/C composite with high crystallinity, sub-micron particle size and suitable content of in-situ introduced Fe2P was synthesized by a sol-gel method, in which LiOH, Fe2C2O4 and NH4H2PO4 were used as starting materials, and ethylene glycol was used as complexing agent and carbon source. The precursor of LiFePO4 was calcined at a comparatively low temperature for relatively long time combined a following calcination at a comparatively high temperature for relatively short time. The composite shows high-rate capability as cathode material for lithium-ion batteries. The structure and the electrochemical properties of the LiFePO4/C composites synthesized by different calcination parameters were analyzed by X-ray diffraction, scanning electron microscopy, element analysis and electrochemical testing of galvanostatic charge-discharge, etc. The results show that the step-wise calcination at different temperatures for different times is an effective approach to obtain suitable amount of in-situ Fe2P, control the particle size and enhance the crystallinity of LiFePO4, which results in a significant improvement in the high-rate capability of LiFePO4. The LiFePO4/C composite synthesized at a calination temperature of 600℃ for 20 h followed by a further calcination at 700℃ for 4 h has 4wt% Fe2P and 3wt% C. The composite possesses discharge capacities of 140, 110 and 100 mAh/g at discharge rates of 1, 10 and 20 C, respectively.

Effect of calcination temperature on electrochemical performances of LiFePO4/C cathode material

Effect of Synthesis Temperature on Electrochemical Performances of LiFePO4/C Composites

Synthesis And Electrochemical Properties Of Li2fesio4/C As Cathode Materials For Lithium-Ion Batteries

Effect of sintering time on the physical and electrochemical properties of LiFePO4/C composite cathodes

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

Preparation and Electrochemical Performance of LiFePO_4/C Using Fe_2O_3 As Raw Material

Fe3O4/C Composites Synthesized from Fe-based Xerogels for Anode Materials of Li-ion Batteries

Synergetic Effect of the Crystallinity, Particle Size of LiFePO4 and the In-Situ Introduced Fe2P on Its High-Rate Capability

Optimization of Carbon Coatings on LiFePO4: Carbonization Temperature and Carbon Content

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

Preparation and properties of LiFePO4/C composite materials with Fe2O3 as starting reactant

Effect of calcination temperature on the electrochemical performance of nickel nanoparticles on carbon coated porous silicon nanospheres anode for lithium-ion batteries

Electrochemical Performance of LiFePO 4 /(c+fe 2 P) Composite Cathode Material Synthesized by Sol-Gel Method

Insight into the Microscopic Morphology and Electrochemical Performance Correlation Mechanism Upon Calcination at Different Temperatures of a Novel Spherical Cobalt-Free 0.6li2mno3·0.4li[fe1/3ni1/3mn1/3]o2 Cathode

One-Step Solid-State Synthesis And High-Temperature Electrochemical Performance Of Carbon Coated Lifepo4 Cathode

Enhanced Electrochemical Performance of LiFe0.6Mn0.4PO4/C Cathode Material Prepared by Ferrocene-Assisted Calcination Process

Effect of Heat-Treatment Condition on the Morphology and Electrochemical Property of LiFePO4

Effect of the Structure of Pyrolytic Carbon on the Performance of LiFePO4/C Composite Cathode Material

Improved Electrochemical Performances of LiFePO4·Li3V2(PO4)/C Composite Cathode Materials Prepared by Two Simple Solid-State Methods

Mesoporous Li2 FeSiO4/C as Cathode Material for Lithium Ion Battery

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery