Abstract:Carbon free composites Li1−xMgxFePO4 (x=0.00, 0.02) were synthesized from LiOH, H3PO4, FeSO4 and MgSO4 through hydrothermal route at 180°C for 6h followed by being fired at 750°C for 6h. The samples were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), flame atomic absorption spectroscopy and electronic conductivity measurement. To investigate their electrochemical properties, the samples were mixed with glucose as carbon precursors, and fired at 750°C for 6h. The charge–discharge curves and cycle life test were carried out at 23±2°C. The Rietveid refinement results of lattice parameters of the samples indicate that the magnesium ion has been successfully doped into the M1 (Li) site of the phospho-olivine structure. With the same order of magnitude, there is no material difference in terms of the electronic conductivities between the doped and undoped composites. Conductivities of the doped and undoped samples are 10−10Scm−1 before being fired, 10−9Scm−1 after being fired at 750°C, and 10−1Scm−1 after coated with carbon, respectively. Both the doped and undoped composites coated with carbon exhibit comparable specific capacities of 146mAhg−1 vs. 144mAhg−1 at 0.2C, 140mAhg−1 vs. 138mAhg−1 at 1C, and 124mAhg−1 vs. 123mAhg−1 at 5C, respectively. The capacity retention rates of both doped and undoped samples over 50 cycles at 5C are close to 100% (vs. the first-cycle corresponding C-rate capacity). Magnesium doping has little effects on electronic conductivity and electrochemical properties of LiFePO4 composites prepared via hydrothermal route.

Research of Lifepo4/Acetylene Electrochemical Performance by Doping Moo3

Improved Electrochemical Performance And Capacity Fading Mechanism Of Nano-Sized Limn0.9fe0.1po4 Cathode Modified By Polyacene Coating

Improvement Of Lifepo4 Electrochemical Performance By Doping Metal Oxides

Doping Effects on Electronic Conductivity and Electrochemical Performance of Lifepo4

Heightening the long cycling stability and reducing oxygen loss of Li-rich cathode materials by Mo–F Co-doping for half/full lithium-ion batteries

Unveiling the Structure-Activity Relationship of Hollow Spindle-Like Α-Fe2o3 Nanoparticles Via Phosphorus Doping Engineering for Enhanced Lithium Storage

Effects of Ru doping on the structural stability and electrochemical properties of Li2MoO3 cathode materials for Li-ion batteries

Synthesis and Electrochemical Properties of Molybdenum-Doped LiMn0.6Fe0.4PO4 Cathode Materials

Superior lithium storage in Fe<sub>2</sub>O<sub>3</sub> nanoporous arrays endowed by surface phosphorylation and bulk phosphorous doping

Influence of Mg Ion Doping on the Battery Properties of Lifepo4/C

Effect on the Electrochemical Performance of Lithium Iron Phosphate by Cr3+ Ion Doping

Effect of in situ pyrolysis of acetylene (C2H2) gas as a carbon source on the electrochemical performance of LiFePO4 for rechargeable lithium-ion batteries

Improving the Electrochemical Performance of Lifepo4/C by Doping Magnesium Trisilicate

Effects of Magnesium Doping on Electronic Conductivity and Electrochemical Properties of Lifepo4 Prepared Via Hydrothermal Route

Influence of Surface Modification and Mg Ion Doping on Structure and Properties of LiFePO4

Engineering Ag nanoparticles and amorphous MoOx on three dimensional N-doped carbon networks for enhanced lithium storage performance

Effect of F-doping on the properties of LiFePO4-x/3Fx/C cathode materials via wet mechanical agitation-assisted high-temperature ball milling method

Performance of LiFePO4 as lithium battery cathode and comparison with manganese and vanadium oxides

Enhancing electrochemical performance of Mn doped LiFePO4 cathode materials for lithium-ion batteries

Synthesis and electrochemical performance of Mo-doped LiNi0.5Mn1.5O4 cathode material

Study on Mo-doped of Li1.18Ni1/3Co1/3Mn1/3O2 Lithium-rich Ternary Cathode Materials