Abstract:The polymorph of lithium vanadyl phosphate ε-LiVOPO4 is a promising multi-electron intercalation cathode material for Li ion batteries with theoretical capacity of 330 mAh/g. It has been shown to reversibly intercalate and deintercalate Li ions over two redox potentials corresponding to V3+/4+ and V4+/5+ oxidation states. Here we report a low-temperature (LT) hydrothermal synthesis method that produces pure LiVOPO4·2H2O between 120 and 160 oC and pure ε-LiVOPO4 between 180 and 220 oC. We also investigate the structure, electrochemical and thermal properties of the products focusing on ε-LiVOPO4. X-ray diffraction indicates that the lattice parameters of LT ε-LiVOPO4 change linearly with synthesis temperature increase, approaching those reported for high-temperature (HT) synthesized ε-LiVOPO4. Thermogravimetric analysis with mass-spectroscopy (TGA-MS) indicates water loss at 350 °C decreasing from 1.5 to 0.5 wt.% as the synthesis temperature increases from 180 to 220 °C. We have interpreted these observations as an evidence of proton intercalation into the LT ε-LiVOPO4 structure. We have further investigated the process of water loss by in-situ XRD and x-ray absorption spectroscopy (XAS) upon heating, combined with pair-distribution function analysis (PDF) and magnetic measurements of LT ε-LiVOPO4 heated to 350 and 750 °C. In-situ XRD shows abrupt change in the lattice parameters dependences upon temperature at 350 °C. Ex-situ studies indicate that the structure and properties of LT samples heated to 750 °C resemble those synthesized by the solid state method at 750 °C. Interesting reversible change of lattice symmetry upon heating to 550 °C was observed and will be further discussed. LT ε-LiVOPO4 has large particle size, over 10 μm, therefore high-energy ball-milling with carbon is required to bring the particle size to below 1 μm to achieve good electrochemistry. Ball-milled product shows high initial capacity around 300 mAh/g, which holds for about 10 cycles and then gradually decays. The voltage profile of LT ε-LiVOPO4 is sloping upon delithiation, in contrast with the step-like profile of HT ε-LiVOPO4. The detailed distinctions between LT and HT ε-LiVOPO4 leading to variations in the electrochemical performance will be discussed. This work was supported as part of the North East Center for Chemical Energy Storage (NECCES), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012583.

Effect of Environmental Temperature on the Content of Impurity Li3V2(PO4)3/C in LiVPO4F/C Cathode for Lithium-ion Batteries

The Low and High Temperature Electrochemical Performances of Li3V2(PO4)3/C Cathode Material for Li-ion Batteries

A Comparative Study on the Low-Temperature Performance of LiFePO4/C and Li3V2(PO4)3/C Cathodes for Lithium-Ion Batteries

Research on Electrochemical Properties and Fade Mechanisms of Li-Rich Cathode Materials at Low-Temperature

Cobalt-Doped Spinel Cathode for High-Power Lithium-Ion Batteries Toward Expanded Low-Temperature Applications

Hydrothermal Synthesis of Plate-Like Carbon-Coated Li3V2(PO4)3 and Its Low Temperature Performance for High Power Lithium Ion Batteries

Effect of temperature on formation and evolution of solid electrolyte interphase on Si@Graphite@C anodes

Construction of superior performance LiVPO4F/C cathode assisting by a regulating additive NH4F and the “Combination-Protection-Release” mechanism for lithium ion batteries

Effects of temperature on electrochemical impedance spectroscopy of the LiFePO4 battery

Effects of oxidation on structure and performance of LiVPO4F as cathode material for lithium-ion batteries

Electronic Effect Tuned Ion-Dipole Interactions for Low-Temperature Electrolyte Design of LiFePO4-based Lithium-Ion Batteries

Preparation and electrochemical properties of Li3V2(PO4)3 glass-ceramic materials

Effect of particle size on electrochemical performance of lithium iron phosphate materials

Effect of calcination temperature on electrochemical performances of LiFePO4/C cathode material

Temperature-Responsive Formation Cycling Enabling LiF-Rich Cathode-Electrolyte Interphase

Hydrothermal Synthesis, Structural Transformations and Electrochemistry of Lithium Vanadyl Phosphates

Influence of working temperature on the electrochemical characteristics of Al2O3-coated LiNi0.8Co0.1Mn0.1O2 cathode materials for Li-ion batteries

Electrochemical Performance and Kinetics of LiFePO4/C Cathode in a Low-Temperature Electrolyte

Temperature-dependent interphase formation and Li+ transport in lithium metal batteries

“Giving Comes Before Receiving”: High Performance Wide Temperature Range Li-ion Battery with Li5V2(PO4)3 As Both Cathode Material and Extra Li Donor

EVS 25 Shenzhen , China , Nov 5-9 , 2010 Electrochemical performance and kinetics of LiFePO 4 / C cathode in a low-temperature electrolyte