Abstract:Background: Photo-neutrons are produced at the head of the medical linear accelerators (linac) by the interaction of high-energy photons, and patients receive a whole-body-absorbed dose from these neutrons. The current study aimed to find an efficient shielding material for fast neutrons. Methods: Nanoparticles (NPs) of Fe3O4 and B4C were applied in a matrix of silicone resin to design a proper shield against fast neutrons produced by the 18 MeV photon beam of a Varian 2100 C/D linac. Neutron macroscopic cross-sections for three types of samples were calculated by the Monte Carlo (MC) method and experimentally measured for neutrons of an Am-Be source. The designed shields in different concentrations were tested by MCNPX MC code, and the proper concentration was chosen for the experimental test. A shield was designed with two layers, including nano-iron oxide and a layer of nano-boron carbide for eliminating fast neutrons. Results: MC simulation results with uncertainty less than 1% showed that for discrete energies and 50% nanomaterial concentration, the macroscopic cross-sections for iron oxide and boron carbide at the energy of 1 MeV were 0.36 cm- 1 and 0.32 cm- 1, respectively. For 30% nanomaterial concentration, the calculated macroscopic cross-sections for iron oxide and boron carbide shields for Am-Be spectrum equaled 0.12 cm- 1 and 0.15 cm- 1, respectively, while they are 0.15 cm- 1 and 0.18 cm- 1 for the linac spectrum. In the experiment with the Am-Be spectrum, the macroscopic cross-sections for 30% nanomaterial concentration were 0.17 ± 0.01 cm- 1 for iron oxide and 0.21 ± 0.02 cm- 1 for boron carbide. The measured transmission factors for 30% nanomaterial concentration with the Am-Be spectrum were 0.71 ± 0.01, 0.66 ± 0.02, and 0.62 ± 0.01 for the iron oxide, boron carbide, and double-layer shields, respectively. In addition, these values were 0.74, 0.69, and 0.67, respectively, for MC simulation for the linac spectrum at the same concentration and thickness of 2 cm. Conclusion: Results achieved from MC simulation and experimental tests were in a satisfactory agreement. The difference between MC and measurements was in the range of 10%. Our results demonstrated that the designed double-layer shield has a superior macroscopic cross-section compared with two single-layer nanoshields and more efficiently eliminates fast photo-neutrons.

Optimum design for the shielding protection of medical linear accelerator

Physical Analysis of the Radiation Shielding for the Medical Accelerators

Protection Design on Occupational Hazards in the Radiotherapy Place Reconstruction and Device Renewal

HI-13 tandem accelerator radiation protection system

Monte carlo simulation of radiation field optimization for medical linac

Optimization Study on Shielding Design for Horizontal Ducts of China Advanced Research Reactor

Assessment and Analysis for Deployment Appropriateness of Medical Linear Accelerator at Hospitals in China

RADIATION PROTECTION CALCULATION AND OPTIMIZATION FOR SHIELDING DESIGN AROUND THE REFUELING PIPELINES OF HTR-PM

STUDY ON THE SHIELDING AND DOSE RATE DISTRIBUTIONS OF THERAPEUTIC PROTON SYNCHROTRON ACCELERATOR BASED ON FLUKA

The Brief Description of Medical Linear Accelerator Technology

Physical Design of A 10 Mev Linac for Polymer Radiation Processing

Novel design of a personnel protection system for large particle accelerators: balancing safety, reliability, and cost

Design and fabrication of a Nano-based neutron shield for fast neutrons from medical linear accelerators in radiation therapy

Optimization of Radiation Shielding Considerations for Designing Halcyon Vault

Installation and Quality Control of Medical Linear Accelerator

A new lead-free radiation shielding material for radiotherapy

A New Chinese Standard for Testing of Quality Control in Medical Proton/heavy Ion Beam Radiotherapy Equipment

Study of a High Temperature–Resistant Shielding Material for the Shielding Doors of Nuclear Power Plants

Analysis the Reconstruction of the Machine Room for Mobile Linear Accelerator for Intra-Operative Radiation Therapy

Physical design of a single-amplifier-driven proton linac injector for a synchrotron-based proton-therapy system in China

Structural Shielding Design of CT Facility using Monte Carlo Simulation