CONSTRUCTION AND TESTS OF A 10 MeV LINAC FOR POLYMER RADIATION PROCESSING *
Guangyao Feng,Yuanji Pei,Lin Wang,Shancai Zhang,Yilin Hong,Lei Shang,Kai Jin,Xiangqi,Wang,Chenggui Yao
2010-01-01
Abstract:In china, polymer radiation processing has become one of the most important processing industries. Electron beam accelerator or radioactive source is usually used as radiation processing source. For radiation crosslinking application, physical design, construction and testing of a electron beam facility is introduced because of it’s much higher dose rate and efficiency. Main part of this facility is a 10MeV traveling wave electron linac with constant impedance accelerating structure. It is the first electron beam facility designed for polymer radiation processing by National Synchrotron Radiation Laboratory (NSRL) in China. In the paper, a start to end simulation is finished to optimize electron beam dynamics in the linac. Measurement results of some subassemblies are presented. The linac construction has been finished just now. Testing experiments prove that the facility can work well for radiation crosslinking application. INTRODUCTION As we know, charged particle accelerator can be applied in many fields, Such as high energy particles experiments, synchrotron radiation research. It also can be applied in industry, agriculture, medicine[1], etc. Commonly, industrial irradiation accelerators include dynamitron, induction accelerator, insulating transformer accelerator, linear accelerator, rhodotron, etc. For industrial applying accelerator, considering the security against radiation, energy gain is usually limited not higher than 10MeV. In China, polymeric materials radiation processing has become one of the important processing industries. As a rule, there are four polymeric materials radiation effects including radiation crosslinking, radiation induced grafting, radiation polymerisation and radiation degradation. About 90% radiation processing products are obtained by radiation crosslinking in China now. In the paper, design of 10MeV traveling wave electron linac with constant impedance accelerating structure is introduced, which will be applied for radiation crosslinking for University of Science and Technology of China (USTC) Chuangxin Stock Limited Company. Measurement results of some subassemblies are presented. The linac construction has been finished recently. Testing experiments prove that the facility can work well for radiation crosslinking application. SUBSYSTEMS AND BEAM DYNAMICS Main parts of the 10MeV electron linac include DC electron gun, disk-loaded periodic structures, RF power supply, wave guides, focusing solenoids, vacuum system, control system, orbit correction system and beam diagnoses system, etc. Figuer1 shows layout of the linac. In order to satisfy the industrial requirement, Table1 gives main parameters of the machine. This facility works in S band and the RF frequency is 2856MHz. Figure 1: Layout of the 10MeV linac. Table 1: Main Parameters of The Linac Beam energy (MeV) 8-10 Beam current power (kW) ~10 Pulse current (mA) 300-400