Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

Kinematics Control for a 7-DOF Cable-Driven Anthropomorphic Arm.

Forward Kinematics and Workspace Analysis for a 7-DOF Cable-Driven Humanoid Arm

A Solution of Inverse Kinematics for 7-DOF Manipulators and Its Application

Kinematic Analysis and Simulation of a 7-DOF Cable-Driven Manipulator

Trajectory Tracking Control for a 7-DOF Cable-Driven Modular Manipulator

A Novel Cable-Driven 7-DOF Anthropomorphic Manipulator

Design and Stiffness Analysis of a Novel 7-DOF Cable-Driven Manipulator

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

Innovative Design Research on a Cable-Driven Humanoid Robotic Arm

Kinematics Analysis of a Novel 7-DOF Humanoid Manipulator for Table Tennis

Motion Control of a 4-DOF Cable-Driven Upper Limb Exoskeleton

Research on the Motion and Dynamics of Biomimetic Manipulator with Seven Degrees of Freedom

Control Hybrid Position/force of Cable-Driven Robotic Arm with Wrist Force Sensors

Design and Analysis of 7-DOF Cable-Driven Manipulator

Bionic Design of a 7-DOF Human-arm-like Manipulator Actuated by Antagonized Pneumatic Artificial Muscles

Dynamic Modeling and Tension Analysis of a 7-DOF Cable-Driven Robotic Arm

Kinematic Analysis and Solution of the Natural Posture of a 7DOF Humanoid Manipulator

A Biomimetic Planning Control Method To Anthropomorphize A 7-Dof Redundant Manipulator In Unstructured Environments

Kinematic Analysis And Mechanical Design Of A Humanoid Manipulator

Design, Modeling and Kinematics Analysis of a Modular Cable-Driven Manipulator

Modular Design Of 7-Dof Cable-Driven Humanoid Arms