Abstract:As a programmable multifunctional operating platform, manipulator plays an important role in production and life. The rigid joint manipulator started early and developed mature, and has been widely used in the industrial field. However, the working environment of the rigid manipulator is limited by the electromechanical system, and it is difficult to implement reliable protection in extreme environments such as explosive, high temperature and radiation, so the use is limited. With the advantages of flexible electromechanical system layout, high load-to-weight ratio and good inherent safety, the cable drive flexible manipulator gets wide attention in the fields of medical assistance and family service. In this paper, taking into account the operation requirements of extreme environment, facing the development trend of man-machine coordination, and giving full play to the characteristics of flexible electromechanical system layout of the cable-driven manipulator, a 7-DOF lightweight cooperative manipulator is proposed. Firstly, the kinematic coupling phenomenon in the transmission is analyzed, and the kinematic decoupling scheme of the bending joint and the rotating joint is proposed. Secondly, considering the kinematic and dynamic similarity with human arm, the joint structure design of the cable drive manipulator is completed, the kinematics model of the cable drive manipulator is established. The drive system, such as the servo motor and drum, is installed on a fixed base, effectively reducing the overall mass of the manipulator, improving the energy efficiency of the motion, the safety of man-machine collaboration and the adaptability to harsh environments.

Dynamic Modeling and Tension Analysis of a 7-DOF Cable-Driven Robotic Arm

Tension distribution algorithm of a 7-DOF cable-driven robotic arm based on dynamic minimum pre-tightening force.

Tension Optimization for the Dynamic Model of Cable-Driven Humanoid Arm

Dynamic Analysis of Cable-Driven Humanoid Arm Based on Lagrange’s Equation

Kinematic Analysis and Simulation of a 7-DOF Cable-Driven Manipulator

Design and Stiffness Analysis of a Novel 7-DOF Cable-Driven Manipulator

Cable Tension Analysis Oriented the Enhanced Stiffness of a 3-DOF Joint Module of a Modular Cable-Driven Human-Like Robotic Arm

Tension research of a cable-driven biomimetic shoulder robot.

Tension Reduction Method for a Modular Cable-Driven Robotic Arm with Co-Shared Cables

Forward Kinematics and Workspace Analysis for a 7-DOF Cable-Driven Humanoid Arm

Mechanism Design, Kinematics and Dynamics Analysis of a 7-Degree-Of-Freedom (DOF) Cable-Driven Humanoid Robot Arm

Stiffness modeling and distribution of a modular cable-driven human-like robotic arm

Design and Analysis of 7-DOF Cable-Driven Manipulator

Catenary model and dynamic analysis of a 6-DOF cable-driven parallel robot

Innovative Design Research on a Cable-Driven Humanoid Robotic Arm

Kinematics Control for a 7-DOF Cable-Driven Anthropomorphic Arm.

Design and Nonlinear Modeling of a Modular Cable Driven Soft Robotic Arm

Tension Analysis For A Cable-Driven 7-Dof Manipulator

Dynamic control of a 3-DOF cable-driven robot based on backstepping technique

Configuration Optimization and a Tension Distribution Algorithm for Cable-Driven Parallel Robots.

Tension Optimization of a Cable-Driven Coupling Manipulator Based on Robot Dynamics with Cable Elasticity.