Abstract:A fracture theory for a heterogenous aggregate material which exhibits a gradual strain-softening due to microcracking and contains aggregate pieces that are not necessarily small compared to structural dimensions is developed. Only Mode I is considered. The fracture is modeled as a blunt smeard crack band, which is justified by the random nature of the microstructure. Simple triaxial stress-strain relations which model the strain-softening and describe the effect of gradual microcracking in the crack band are derived. It is shown that it is easier to use compliance rather than stiffness matrices and that it suffices to adjust a single diagonal term of the complicance matrix. The limiting case of this matrix for complete (continuous) cracking is shown to be identical to the inverse of the well-known stiffness matrix for a perfectly cracked material. The material fracture properties are characterized by only three parameters—fracture energy, uniaxial strength limit and width of the crack band (fracture process zone), while the strain-softening modulus is a function of these parameters. A method of determining the fracture energy from measured complete stres-strain relations is also given. Triaxial stress effects on fracture can be taken into account. The theory is verified by comparisons with numerous experimental data from the literature. Satisfactory fits of maximum load data as well as resistance curves are achieved and values of the three material parameters involved, namely the fracture energy, the strength, and the width of crack band front, are determined from test data. The optimum value of the latter width is found to be about 3 aggregate sizes, which is also justified as the minimum acceptable for a homogeneous continuum modeling. The method of implementing the theory in a finite element code is also indicated, and rules for achieving objectivity of results with regard to the analyst's choice of element size are given. Finally, a simple formula is derived to predict from the tensile strength and aggregate size the fracture energy, as well as the strain-softening modulus. A statistical analysis of the errors reveals a drastic improvement compared to the linear fracture theory as well as the strength theory. The applicability of fracture mechanics to concrete is thus solidly established.

Fracture Resistance on Aggregate Bridging Crack in Concrete

Experimental Study on Some Factors Affecting Fracture Property of Concrete

Fracture Toughness And Microstructure Of Concrete At Early-Ages

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

Effect of Coarse Aggregate Type on the Fracture Toughness of Ordinary Concrete

Evaluation of Fracture Parameters of Concrete from Bending Test Using Inverse Analysis Approach

The new GR crack extension resistance as a fracture criterion for complete crack propagation in concrete structures

Crack Extension Resistance and Fracture Properties of Quasi-Brittle Softening Materials like Concrete Based on the Complete Process of Fracture

Determination of crack extension resistance of concrete from boundary effect model

Determination of fracture parameters for crack propagation in concrete using an energy approach

Influence of Mineral Admixture on Early-Age Concrete Cracking

Experimental study on fracture properties of self-compacting concrete

Determination of Concrete Fracture Parameters from a Three-Point Bending Test

Fracture Toughness of Ordinary Plain Concrete Under Three-Point Bending Based on Double-K and Boundary Effect Fracture Models

EFFECT OF COARSE/FINE AGGREGATE RATIO AND CEMENT MATRIX STRENGTH ON FRACTURE PARAMETERS OF CONCRETE

Crack band theory for fracture of concrete

Effect of coarse aggregate size distribution on fracture toughness of concrete based on boundary effect model

Bridging Law Application to Fracture of Fiber Concrete Containing Oil Shale Ash

Design of Concrete Fracture Property by Average Aggregate Size

Correlation Between Tension Softening Relation and Crack Extension Resistance in Concrete

Crack-Parallel Stress Effect on Fracture of Fiber-Reinforced Concrete Revealed by Gap Tests