Abstract:This paper addresses issues of the synergetic dynamic effect of capillary force on the longitudinal impregnation driven by external pressures, especially under vacuum assistance. An apparatus was designed to detect the axial infiltration along unidirectional fiber bundles which were all aligned closely to give a representation of micro-flow channel of inner fiber tows. The external driving pressures were controlled sufficiently low, 20–60kPa, on the order of capillary pressures. Based on the analysis of infiltration velocities under different external pressures, dynamic capillary pressures can be determined experimentally. The results showed that capillary pressures, the most important force of microscopic flow through inner fiber yarns, acted as a drag force on the infiltration flow for vacuum assisted penetration into unidirectional fiber bundles. This unique drag effect is very different from traditional unsaturated infiltration, different from the compressed air driving permeation and the theoretical calculated data in this paper. Moreover, values and even signs of the dynamic capillary pressures varied with the fiber fraction of the assemblies as well as the fluid types. Further analysis demonstrated that the function of capillary pressure was closely related to the capillary number (Ca), acting as drag force when Ca larger than a critical value, and as a promotive force with smaller Ca. Consequently, unsaturated permeabilities of the unidirectional fiber bundles were estimated by taking consideration of both dynamic and quasi-static capillary pressures.

Study on Capillary Pressure of Fabric Preforms

Study on the Permeability of ES-Fabric~(TM)

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Analysis and Characterization of Interlaminar Tack for Different Prepreg Materials During Automated Fiber Placement

Experimental Study on Water Permittivity of Woven Polypropylene Geotextile under Tension

Evaluation of through-thickness permeability and the capillary effect in vacuum assisted liquid molding process

Permeability Prediction in Nonwoven Geotextiles Using Mathematical Modeling and Numerical Simulation

Effect of Lye Disposal and Draw on Performance of Floss Silk

Research progress of numerical simulation on heat and moisture transfer in porous textiles

Dynamic capillary impact on longitudinal micro-flow in vacuum assisted impregnation and the unsaturated permeability of inner fiber tows

Some Studies on Water Permeability of Nonwoven Fabrics

Permeability analysis of unidirectional fiber assembly under different testing conditions

Study on impregnation parameters in preparation of CFF/PEEK laminates

EFFECT OF LAYERS ON PERMEABILITY

Cohesive zone model for prepreg tack based on probe test

Moldability of Tackified Fiber Preforms in Liquid Composite Molding

Permeability Prediction of Fabric Preform Using Homogenization Method

A Study of the Static/Kinetic Friction Behavior of PTFE-Based Fabric Composites

Waterproof and Moisture Permeability Performance of Laminated Fabrics with Electrospun Nano Fibrous Membrane

Pore size effect on one-way water-transport cotton fabrics

Study on the shear-pretension coupling behavior of 3D uniform and variable thickness woven fabrics