Abstract:<p>Shear thickening fluids (STFs) were found to be effective at enhancing the energy absorption capacity of Kevlar fabrics, which is promising in the area of soft-wall containment casings. In the current study, an improved mesoscale numerical simulation method for the yarn level was developed to predict the properties of STF-Kevlar fabrics with various STF concentrations. In addition, quasi-static and dynamic tensile tests as well as yarn pull-out tests were performed. Based on the dynamic tensile behavior and friction between yarns, a mesoscale numerical simulation method was proposed for STF-Kevlar fabrics. Combined with a ballistic impact test, the numerical simulation method based on the yarn tests was verified. It was found that the STF generates a strain-rate strengthening effect due to its shear thickening behavior during quasi-static tensile tests conducted at 0.0001 and 0.001 s<sup>−1</sup>. The initial elastic modulus, tensile strength, and failure strain of the yarn were obtained from dynamic tensile tests using a split-Hopkinson tension bar (SHTB) apparatus. The yarn pulling process includes the yarn straightening stage and yarn translation stage. The pull-out force decreased with the pull-out rate for the STF-treated yarn. The pull-out force of the STF-treated fabric increased by up to 213.2% compared with the neat fabric at the same pull-out rate. Based on the yarn pull-out testing results, the friction coefficient between the weft and warp yarns was estimated. Mesoscale numerical simulations were performed based on the dynamic tension behavior and friction behavior of the yarn, which were verified through ballistic impact test. Although the friction characteristics of the three STF fabrics were not significantly different, the energy absorption of the STF-treated fabrics differed considerably. As the tensile strength increased, the energy absorption characteristics of the fabric improved considerably.</p>

Study on the Permeability of ES-Fabric~(TM)

Experiments on Welded Seam Performances of C-type Fabric Membrane(PVC/PES)

Experiments on the mechanical properties and the welded seam properties of architectural membranes

Experimental Study on Water Permittivity of Woven Polypropylene Geotextile under Tension

Study on Silk Fibroin Coated PET Fabric

Simulation of the Effects of Structural Parameters of Glass Fiber Fabric on the Thermal Insulation Property

Woven Geotextile Permeability under Uniaxial and Laterally Constrained Conditions

Effects of Structural Parameters on the Thermal Insulation Properties of Coated Carbon Fiber Fabrics

Effect of Lye Disposal and Draw on Performance of Floss Silk

Evaluation of through-thickness permeability and the capillary effect in vacuum assisted liquid molding process

EFFECT OF LAYERS ON PERMEABILITY

Cross-electrospun PVDF/PVDF-HFP nanofibrous membrane with central combination design and its waterproof and moisture permeable composite fabric

Permeability analysis of unidirectional fiber assembly under different testing conditions

Permeability Prediction of Fabric Preform Using Homogenization Method

Experimental study of moisture role and heat transfer in thermal insulation fabric against hot surface contact

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

Designing Unidirectional Moisture Transport Fabric Based on PA/CA Membrane Fabricated by Electrospinning

Study on impregnation parameters in preparation of CFF/PEEK laminates

Effects of Fabric Weave on the Architecture Coated Fabric Properties

Infiltration monitoring using carbon nanotube buckypaper for the characterization of out‐of‐plane unsaturated permeability

Yarn dynamic tensile behavior and meso-scale numerical simulation method for STF-Kevlar fabrics