Abstract:Fused Filament Fabrication (FFF), is one of the most widely used additive manufacturing technologies today, which has been used for a variety of applications. Due to the layer-by-layer manufacturing process, FFF parts are inferior to those fabricated by traditional methods in terms of tensile properties, which is one of the most significant defects that hinder the development of this technique. In this study, a vibration was utilized during the FFF process by piezoelectric ceramics electric plates to improve the mechanical properties of the built parts and surface quality of PLA FFF parts. Subsequently, an investigation of the tensile and the surface quality of PLA FFF specimens built-in X and Z-direction fabricated individually without and with vibrations utilized has been done. Furthermore, a theoretical model has been established to predict the tensile strength and plasticity of FFF parts fabricated without and with vibrations utilized based on classical laminated plate theory, with the anisotropic and laminated characteristics taken into consideration. Young's modulus model has been established based on the laminated plate theory and flexural vibration theoretical approaches of a plate for the PLA FFF parts manufactured without and with vibrations utilized respectively. Compared with the previous models this model provides the tensile strength and plasticity of FFF parts both manufactured without and with vibrations utilized. The results indicate that the predicted tensile strength and plasticity of the PLA FFF parts manufactured with vibrations utilized have a good consistency with the experimental ones, meanwhile, vibration utilization can significantly improve the surface quality of the PLA FFF samples manufactured in the Z-direction, and the scanning electron microscopy (SEM) analysis confirmed that vibration utilization can improve the forming quality of FFF manufactured parts.

Effect of Vibration Parameters on Properties of PP in Dynamic Plasticizing Process

Effect of Vibration Parameters on Properties of Polypropylene in Dynamic Plasticizing Process

Impact Response of Bamboo-Plastic Composites with the Properties of Bamboo and Polyvinylchloride (PVC)

Mechanical Properties of Dynamic Extruded PP by Coat-hanging Die

THE EFFECT OF MECHANICAL VIBRATION ON CRYSTALLIZATION OF POLYPROPYLENE

Study on the Effect of Axial Vibration of Screw in Plasticating Process (Extrusion Part)

Effect of speed sinusoidal pulsating enhancement on the mixing property of plastic machinery

Study on Properties of Filling Systems in Plastic Axial Vibration Injection Processing

Energy Dissipation in Polymer Injection Moulding under Vibration Force Field

Effects of Physical Crosslinking on Properties of Plasticized High Molecular Weight PVC

Modification of polypropylene by melt vibration blending with ultra high molecular weight polyethylene

Effect of Viscosity Ratio on Morphology and Mechanical Properties of PP/HDPE Blend

Effect of rapid heating cycle injection mold temperature on crystal structures, morphology of polypropylene and surface quality of plastic parts

Experimental Study on Improving the Mechanical Properties of Material Extrusion Rapid Prototyping Polylactic Acid Parts by Applied Vibration

Physical and chemical effects of ultrasound vibration on polymer melt in extrusion

Effects of Injection Molding Parameters on Properties of Insert-Injection Molded Polypropylene Single-Polymer Composites

Simultaneously achieving self-toughening and self-reinforcing of polyethylene on an industrial scale using volume-pulsation injection molding

Research on Crystallization Behavior and Mechanical Properties of Plasticized Polpypropylene

Study on Mechanical Properties and Molecular Aggregate of the Dynamic Extrusion Polymer Filling System

Effect of Vibration on Crystal Morphology and Structure of Isotactic Polypropylene in Nonisothermal Crystallization

Investigation on the improvement of mechanical properties and surface quality of the polylactic acid (PLA) fused filament fabrication parts manufactured without and with vibrations dependent utilization