Abstract:Modification mechanism of α nucleating agent oncrystallization behaviors of PP. Polypropylene (PP) was a very practical and important thermoplastic, which was widely used in various fields due to its low cost, universal, and corrosion resistance. However, the moderate mechanical and heat resistance properties of PP limited its application in some special fields. In this paper, nucleating agents NP‐657 were added to further improve its mechanical and heat resistance performances of PP (300H). Furthermore, the heterogeneous nucleation of NP‐657 reduced the crystal size and increased the crystal density of 300H. With the rise of NP‐657 content, the crystallization rate of different PP systems increased significantly, such as the t1/2 of 300H‐0.2 reduced by 31.9 min in comparison with that of 300H at 140°C. At the same time, the crystallinity of 300H‐0.05 with 0.05 wt.% NP‐657 increased by about 5.96% compared with 300H. In addition, 300H‐0.05 has the highest tensile strength (23.9 ± 0.6 MPa), flexural modulus (1273.3 ± 67.3 MPa), and the highest thermal deformation temperature (88.5 ± 7.7°C) in different PP systems. In general, this paper provided a reference for the fabrication of PP with satisfactory mechanical and heat resistance performances. Highlights 300H‐0.05 had a maximum crystallinity of 40.8 ± 0.2% in different PP systems. The flexural modulus of 300H‐0.05 was 434 MPa higher than that of 300H. The tensile strength of 300H‐0.05 increased to 23.9 ± 0.6 MPa. 300H had the highest thermal deformation temperature of 88.5 ± 7.7°C.

Research on Crystallization Behavior and Mechanical Properties of Plasticized Polpypropylene

Crystallization Behavior and Crystal Morphology of Linear/Long Chain Branching Polypropylene Blends

THE STUDY OF APPLIED BEHAVIOR OF PP/PA6 BY USING GRAFTED POLYPROPYLENE AS COMPATILIZER

Regulation of Structure and Mechanical Properties of Poly(propylene-Butene) Alloys by Monomer Composition Switching

Crystallization Behaviors and Mechanical Properties of Polypropylene Grafted by Vinyl Silane/Styrene

Crystallization, mechanical, and heat resistance performances of copolymer polypropylene modified by α nucleating agent

Investigation of Crystallization, Morphology, and Mechanical Properties of Polypropylene/Polypropylene-Polyethylene Block Copolymer Blends

Relationship between molecular structure, crystallization behavior, and mechanical properties of long chain branching polypropylene

Study on Low Temperature Toughness and Crystallization Behavior of Polypropylene Random Copolymer

Effect of Morphology Development on the Low‐temperature Tensile Properties of PP / POE Blends

Crystallization kinetics and morphology of high impact polypropylene

Effect of Injection Stretch-Blow Molding Process on Crystallization Structure and Mechanical Properties of Polypropylene Copolymer

Influence of Epoxidized Ethylene Propylene Diene Rubber on Nonisothermal Crystallization Kinetics and Mechanical Properties of Poly(butylene Terephthalate)/polypropylene Blend

Micro-Structure and Fracture Behavior of High-Melt-Strength PPs Prepared by Reactive Extrusion

PROPERTIES OF PP-g-AA(FPP) PREPARED BY MELT-EXTRUSION AND EFFECT OF FPP ON MECHANICAL PROPERTIES OF POLYPROPYLENE

Advances in Modification of Ethylene Propylene Random Copolymer

THE MECHANICAL AND MELTING CRYSTALLIZATION PROPERTIES OF β-FORM POLYPROPYLENE/POE BLENDS

Effect of the synergistic interaction of zinc adipate, hydrotalcite and ethylene propylene rubber on the performances of polypropylene

The effect of elastomeric nano-particles on the mechanical properties and crystallization behavior of polypropylene

Study on Mechanical Properties of PP/POE Blends

Study of Polypropylene Thermoplastic Elastomer