Abstract:As a highly efficient thick plate welding resolution, narrow gap gas tungsten arc welding (NG-GTAW) is in the face of a series of problems like inter-layer defects like pores, lack of fusion, inclusion of impurity, and the sensitivity to poor sidewall fusion, which is hard to be repaired after the welding process. This study employs numerical simulation to investigate the molten pool behavior in NG-GTAW root welding. A 3D numerical model was established, where a body-fitted coordinate system was applied to simulate the electromagnetic force, and a bridge transition model was developed to investigate the wire–feed root welding. The simulated results were validated experimentally. Results show that the molten pool behavior is dominated by electromagnetic force when the welding current is relatively high, and the dynamic change of the vortex actually determines the molten pool morphology. For self-fusion welding, there are two symmetric inward vortices in the cross-section and one clockwise vortex in the longitudinal section. With the increasing welding current, the vortices in the cross-section gradually move to the arc center with a decreasing range, while the vortex in the longitudinal section moves backward. With the increasing traveling speed, the vortices in the cross-section move toward the surface of the molten pool with a decreasing range, and the horizontal component of liquid metal velocity changes in the longitudinal section. For wire–feed welding, the filling metal strengthens the downward velocity component; as a result, the vortex formation is blocked in the cross-section and is strengthened in the longitudinal section.

Modelling of transport phenomena in 3D GMAW of thick metals with V groove

The Effect of Groove Shape on Molten Metal Flow Behaviour in Gas Metal Arc Welding

Numerical simulation on molten pool behavior of narrow gap gas tungsten arc welding

Three-dimensional numerical simulation of arc and metal transport in arc welding based additive manufacturing

An investigation of metal transfer process in GMAW

Study of the Mechanism of a Stable Deposited Height During GMAW-Based Additive Manufacturing

The wetting and stirring behavior of molten pool in narrow gap AMF-GTAW by numerical and experimental analysis

Numerical investigation on the influence of current waveform on droplet transfer in pulsed gas metal arc welding

Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints

Numerical simulation for dynamic behavior of molten pool in cable-type welding wire GAMW

An Innovative Methodology in Narrow Gap GTAW for Alternating Magnetic Field with Synchronous Swing of Filler Wire and Arc

Numerical Simulation of Arc and Droplet Behaviors in TIG-MIG Hybrid Welding

Experimental measurement of fluid flow in high-speed GMAW assisted by transverse magnetic field

Modeling and numerical study of the molten pool dynamics during scanning electron beam welding of aluminum alloys: Physical mechanism, prediction and parameter selection

Numerical simulation of metal transfer in argon gas-shielded GMAW

Effect of leading and trailing torch configuration on mixing and fluid behavior of laser-gas metal arc hybrid welding

Influencing of Molten Pool Dynamic Behavior on the Weld Formation during the Laser‐Arc Hybrid Welding of 12 mm Thick Steel

Effects of Welding Speed and Pulse Frequency on Surface Depression in Variable Polarity Gas Tungsten Arc Welding of Aluminum Alloy

Numerical simulation and experiment for the dynamic behavior of molten pool in ultrasonic-assisted MIG welding

Modeling of droplet short-circuiting transfer and simulation of three-dimensional transient behavior of molten pool

Identification of a heat source model for multipass narrow groove GMA welding process