Abstract:In the field of low temperature co-fired ceramic (LTCC), it remains a challenge to design the performance of LTCC with low permittivity less than 5. Here, a novel glass mixture of K-Al-B-Si-O (KABS) and Zn-B-Si-O (ZBS) is introduced as a sintering aid of alumina to obtain ultralow-permittivity glass/Al2O3 composite. Meanwhile, the factors of glass mixture component on microstructure, phase structure and dielectric properties of the composites are considered systematically. The crystal structure measured by X-ray diffraction (XRD) shows that pure crystalline phase of ZnAl2O4 spinel can be attained by tailoring the component of the glass mixture. In case of mass ratio of KABS: ZBS equal to 6:4, it favors to efficiently increase the sintering densification of composite, and significantly benefit the low dielectric loss, good mechanical and thermal performances. In detail, the optimal glass/ceramic composites sintered at 850 degrees C for 2 h exhibit the bulk density of 2.89 g/cm3, epsilon(r) of 4.92 at 14 GHz and Q x f of 6873 GHZ, flexural strength of 202 MPa, thermal expansion coefficient of 5.5 ppm/degrees C. The above study provides an effective approach for preparing the novel composites as a promising candidate for LTCC applications.

Development of Low Temperature Co-fired Glass/Ceramic Substrate

Application and Research Progress of LTCC Materials

Research Progress of Low Temperatue Co-fired Microwave Dielectric Ceramics

Passive Integration Technology and Application of Low Temperature Co-fired Ceramic

Research of LTCC/Cu, Ag Multilayer Substrate in Microelectronic Packaging

Low Temperature Sintering and Characterization of La2O3-B2O3-CaO Glass-Ceramic/labo3 Composites for LTCC Application

The study on fabrication of dielectric materials for low temperature Co-fired ceramics

Material Science and Design Strategies of Low-Temperature Co-Fired Ceramic (LTCC) Dielectrics

Optimization of LTCC Multilayer Interconnect Substrate Process

Research Progress in Ceramic Substrate Material for Electronic Packaging

Towards rational design of low-temperature co-fired ceramic (LTCC) materials

Synthesis, microstructure and characterization of Ultra-low permittivity and dielectric loss ZnO-B2O3-SiO2 glass/SiO2 composites for LTCC application

Densification and Characterization of Sio2-B2o3-Cao-Mgo Glass/Al2o3 Composites for Ltcc Application

Matching Correlation Study of Titanium-Based Ceramics with Glass Based on Dissolution Characteristics

Development and application of ferrite materials for low temperature co-fired ceramic technology

Study of Low Temperature Cofired Al_2O_3/Glass Composite Substrate Material

Microstructure and Mechanical Properties of an Alumina–glass Low Temperature Co-Fired Ceramic

Microwave dielectric characterization and densification mechanism analysis of CaO‐B2O3‐SiO2 glass‐ceramic/Al2O3 composites for LTCC applications

Ultralow-permittivity Glass /al2o3 Composite for LTCC Applications

Low Temperature Sintering Densification and Properties of CaO-B2O3-SiO2-ZrO2 Glass/ca0.99cu0.01sio3 Composites for LTCC Application

Microwave dielectric characterization and thermal analysis of B2O3-La2O3-ZnO glass-ceramic/Al2O3 composites for LTCC applications