Abstract:As a novel kind of composite, polymer/montmorillonite nanocomposites have attracted more and more researcher’s attention due to their far-reaching academic and application significance. Because of its special structure, the montmorillonite (MMT), especially the organically modified montmorillonite or organic montmorillonite (org-MMT), has been widely used for preparing polymer/montmorillonite nanocomposite by means of intercalated polymerization [1‐4], solution intercalation [5‐7] and melt intercalation [8‐11]. For generating polymer-layered silicate nanocomposite, melt intercalation is more efficient and environmentallybenign as compared with the other two intercalation processes, and can be processed with general plastics processing equipment such as extruders. Generally, org-MMT with a polymer matrix must be processed under heat and force during melt intercalation. However the layer stacking of org-MMT structure is unstable upon heating [12] since the organically modified agents which is inserted into the spaces between the MMT layers will decompose under circumstance of heat or strong force. In this paper, we paid our attentions to the structure stability of organic montmorillonite modified by cetyltrimethylammonium bromide and its mixtures with stearic acid through ball mill. “Kunipia F”(sodium montmorillonite (MMT), cation exchange capacity = 115 meq/100 g, purity ≥99%, Kunimine Ind. Co. Japan), CTAB (cetyltrimethylammonium bromide, analytically pure, Shanghai Chem. Reagent Co., China), low density polyethylene (LDPE) (melt flow rate = 7.6 g/10 min at 190 ◦ C, 2.16 kg, Beijing Yanshan Petrochem. Co. Ltd., China), ethylene vinyl acetate copolymer (EVA) (H2020, Polyolefin Co. Singapore) and commercially available stearic acid (HSt) were used here, as modifiers, matrix of composites and compatiblizer, etc. respectively. Organic montmorillonite (org-MMT) was prepared from MMT by ion exchange reaction using CTAB in water according to the reported method [13]. Org-MMT, org-MMT/HSt(10/1) and org-MMT/HSt(5/1) were ball milled for different times with sixteen small balls (� = 10 mm) and two big balls (� = 20 mm) under a constant mill speed (150 rpm) respectively. The thermal stability of org-MMt was evaluated using thermogravimetry (TG). LDPE/EVA /org-MMT (85/12/3) were blended in a twin-screw extruder (TSE 16 TC, ∗ Author to whom all correspondence should be addressed. PRISM, UK). The measurements of dynamic viscoelasticity were conducted by Advanced Rheology Expansion System (ARES, Rheometrics Sci. Ltd., USA) using parallel model with diameter of 25 mm. The changes of sample structure were characterized by X-ray diffraction (XRD). The space between the two layers of MMT is given by the following expressions d = λ

Reinforced Thermoplastic Acetylated Starch With Layered Silicates

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Triglycidyl Para -Aminophenol Modified Montmorillonites for Epoxy Nanocomposites and Multi-Scale Carbon Fiber Reinforced Composites with Superior Mechanical Properties

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Thermoplastic starch hybrid biocomposite films with improved strength and flexibility produced through crosslinking via carboxylic acid

The Regulatory b Subunit of Protein Kinase CK2 Mediates Formation of Tetrameric CK2 Complexes*

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Biodegradable Nanocomposites Based on Blends of Poly(Butylene Adipate–Co–Terephthalate) (PBAT) and Thermoplastic Starch Filled with Montmorillonite (MMT): Physico-Mechanical Properties

Structure stability of organic montmorillonite used for preparing polyethylene/montmorillonite nanocomposite

Thermoplastic Starch with Maltodextrin: Preparation, Morphology, Rheology, and Mechanical Properties

The Effect of Montmorillonites on the Physicochemical Properties of Potato Starch Films Plasticized with Deep Eutectic Solvent

Solid-State Graft Polymerization Of Styrene In Spherical Polypropylene Particles In The Presence Of Montmorillonite

MARTINI Coarse-grained Force Field for Thermoplastic Starch Nanocomposites

Production of high purity (94m)Tc for positron emission tomography studies.

Preparation of exfoliated and dispersed thermoplastic starch/montmorillonite nanocomposites via synergy of phase‐transition and ultrasonic in elongational flow field

Improving thermal stability of starches native cross-linked with citric acid as a compatibilizer for thermoplastic starch/polylactic acid blends

STARCH/POLY (BUTYLENE ADIPATE-CO-TEREPHTHALATE)/MONTMORILLONITE FILMS PRODUCED BY BLOW EXTRUSION

Effect of Starch Plasticization on Morphological, Mechanical, Crystalline, Thermal, and Optical Behavior of Poly(butylene adipate-co-terephthalate)/Thermoplastic Starch Composite Films

MMT‐St and PLA synergistically enhanced the microcellular of TPU foam and improved its dimensional stability