Abstract:High yield of petrochemicals, such as light olefins and aromatics, is an important way for low-carbon utilization of petroleum. Based on China’s energy structure and technological advantages in the field of catalytic cracking, the direct production of light olefins and aromatics from heavy feedstock oil under the confinement of molecular sieves is an important development direction of China’s oil refining industry. It poses great challenges to the design of multi-phase reactors. Counter-current interaction between feed-oil and deep-cracking catalysts under high severity should be achieved to prevent preferential adsorption of heavy aromatics, reduce diffusion resistance in zeolitic nanopores, and boost deep cracking of short-chain alkanes. Millisecond residence time and plug-flow residence time distribution should be obtained to inhibit secondary reactions and reduce dry gas and coke production. This review focuses on the progress of discrete transport, reaction, and deactivation processes in the catalytic cracking of heavy oil directly to chemicals, as well as the progress of gas-solid heterogeneous reaction engineering and other related fields. The latest research work on the discrete adsorption-diffusion phenomenon and host-guest interactions of small molecules in zeolites are introduced, and it is proposed to use facet-selective nanosized zeolites with high resistance to coke formation and gas-solid counter-current contact plug flow reactors to overcome the above challenges. Finally, the multi-stage downer catalytic pyrolysis（MDCPTM） developed by Tsinghua University is introduced, which uses multi-stage downers in series while achieving both millisecond-level plug-flow within one stage and counter-current gas-solids interaction between each stage. In the 1 kg/h pilot plant,MDCPTM can gain excellent production distribution [51.54%（mass） yield of light olefins and 80.78%（mass）selectivity of BTEX in gasoline]. With MDCPTM as the core unit, the process, i.e., heavy oil to chemicals（HOTC）, is reported where the yield of the total chemicals can be up to 75%（mass）, with carbon emission reduced by more than 70% compared with existing technologies.

INDUSTRIAL APPLICATION OF LCC-300 CATALYST FOR ENHANCING PROPYLENE YIELD IN TWO-STAGE RISER CATALYTIC PYROLYSIS OF HEAVY OIL

Co-hydropyrolysis of Pine and HDPE over Bimetallic Catalysts: Efficient BTEX Production and Process Mechanism Analysis

Heavy Oil to Chemicals: Multi-Stage Downer Catalytic Pyrolysis

Efficient Pyrolysis of Low-Density Polyethylene for Regulatable Oil and Gas Products by ZSM-5, HY and MCM-41 Catalysts

In-depth Study of Synergism Between Torrefaction and Catalyst for Balanced Production of Bio-Oil from Rice Husk Pyrolysis Based on Hydrocarbons Production, Energy Yield and Deoxygenation Degree

Integrating continuous-stirred microwave pyrolysis with ex-situ catalytic upgrading for linear low-density polyethylene conversion: Effects of parameter conditions

DEVELOPMENT AND COMMERCIAL APPLICATION OF KEY TECHNOLOGY FOR EFFICIENT CONVERSION OF HEAVY OIL

Efficient and Stable Ni-Cu Catalysts for Ex Situ Catalytic Pyrolysis Vapor Upgrading of Oleic Acid into Hydrocarbon: Effect of Catalyst Support, Process Parameters and Ni-to-Cu Mixed Ratio

Mechanism of synergistic effects and kinetic analysis in bamboo-LDPE waste <i>ex</i>-<i>situ</i> catalytic co-pyrolysis for enhanced aromatic hydrocarbon production via CeZrAl and HZSM-5 dual catalyst

Mechanism of synergistic effects and kinetic analysis in bamboo-LDPE waste ex-situ catalytic co-pyrolysis for enhanced aromatic hydrocarbon production via CeZrAl and HZSM-5 dual catalyst

A Novelty Catalytic Reforming of Tire Pyrolysis Oil for Hydrogen-Rich Syngas

Economics-Oriented NMPC of Two-Stage-Riser Catalytic Pyrolysis Processes for Maximizing Propylene Yield

Study on the FCC process of a novel riser-downer coupling reactor (III): Industrial trial and-CFD modeling

High-quality petroleum-like fuels and/or profitable value-added platform chemicals manufactured via a solid acid-catalyzed two-stage fast oil shale pyrolysis

Catalytic fast pyrolysis of low density polyethylene into naphtha with high selectivity by dual-catalyst tandem catalysis

A novel three-stage ex-situ catalytic pyrolysis process for improved bio-oil yield and quality from lignocellulosic biomass

Fundamental studies and pilot verification of an olefins/aromatics-rich chemical production from crude oil dehydrogenation catalytic pyrolysis process

Improving Aromatic Hydrocarbon Content from Catalytic Pyrolysis Upgrading of Biomass on a CaO/HZSM-5 Dual-Catalyst

Maximization production of light olefins from dual-stage catalytic dehydrogenation cracking of crude oil: Catalysis mechanism and pilot trial

Rapid Identification of Optimized Process Parameters Via RSM for the Production of Valuable Aromatic Hydrocarbons Using Multiphase Catalytic Pyrolysis of Mixed Waste Plastics

Opportunities for utilizing waste cooking oil in crude to petrochemical process: Novel process design, optimal strategy, techno-economic analysis and life cycle society-environment assessment