Abstract:The Ni-Mn-based shape memory alloys as a promising candidate of elastocaloric material has been reported in many literatures, especially on bulk samples. The as-spun ribbon, which has a larger surface area and is more efficient for heat transfer, is rarely studied and hence of importance. In the present work, we succeeded in producing very long as-spun Ni-Fe-Mn-(Al, In) ribbons, with around 300 mm in length. The microstructure and mechanical properties of these as-spun ribbons were thoroughly investigated by scanning electron microscopy / electron backscattered diffraction (SEM/EBSD), nanoindentation and 3-points bending experiments. Through SEM/EBSD analyses, the microstructure and texture of the as-spun ribbons were studied. A gradient in microstructure exists along the thickness direction (TD) of the ribbon, which is induced by the temperature gradient during fast rate solidification, resulting in fine equiaxed grains along the surface contacted with the rotating wheel in melt spinning process and elongated grains, respectively. Both equiaxed and elongated grains possess a strong {001} fiber texture (<001>//TD). Nanoindentation analyses show little variation of hardness between the two different microstructures. The ductility index of both Ni-Fe-Mn-Al and Ni-Fe-Mn-In ribbons are within the range of intermetallic materials. The substitution of In by Al allows to increase very slightly the ductility index, which can reach 0.75. The fine equiaxed grains show better tensile resistance than the elongated grains in 3-points bending test. The substitution of In by Al improves the maximum bending strain by a factor of 3. The maximum strain for Ni-Fe-Mn-Al as-spun ribbons can reach 3 % before fracture. Fractography shows that the intergranular fracture is the main damage mechanism in these as-spun ribbons.

Magnetic, martensitic transformation, magnetostriction and shape memory effect in Co<sub>50</sub>Ni<sub>20</sub>Ga<sub>30</sub> melt-spun ribbons

Structure and Magnetic Properties of Melt-Spun (Nd0.625ni0.375)(85)al-15 Ribbons

Structural, Magnetic and Mechanical Properties of Oligocrystalline Ni-Mn-Ga Shape Memory Microwires

Martensitic Transformation Of (Ni55.3fe17.6ga27.1)(100-X)Co-X Magnetic Shape Memory Alloys

Martensitic transformation and magnetic properties in Heusler CoNiGa magnetic shape memory alloys

The Magnetic and Microstructural Evolution of Ni45mn24ga23co4cu4 Heusler Alloy Ribbons

Microstructure, martensitic transformation kinetics, and magnetic properties of (Ni50Mn40In10)100−xCox melt-spun ribbons

Martensitic transformation of (NiFeGa)Co magnetic shape memory alloys

Microstructure Evolution in CoNiGa Shape Memory Alloys

Structure, Magnetic and Magnetocaloric Properties of Ni2MnGa Heusler Alloy Nanowires

Martensitic and magnetic transformations of Ni56Fe17Ga27-xCox high-temperature ferromagnetic shape memory alloys

Magnetic Properties and Magnetic Entropy Change of Co(50)Ni(22)Ga(28) Alloy

Effect of Grain Constraint on the Field Requirements for Magnetocaloric Effect in Ni45Co5Mn40Sn10 Melt-Spun Ribbons.

Effect of Annealing on the Martensitic Transformation and Magnetocaloric Effect in Ni44.1Mn44.2Sn11.7 Ribbons

Magnetic-Field-Induced Martensitic Transformation in Mnniga : Co Alloys

Effect of Co on the Martensitic Transformation, Crystal Structure and Magnetization of Ni52.5Mn23.5Ga24 Based Ferromagnetic Shape Memory Alloys

Microstructure, Magnetic and Magnetocaloric Properties in Ni42.9co6.9mn38.3sn11.9 Alloy Ribbons

Martensitic Transformation Behaviors and Magnetic Properties of Ni–Mn–Ga Rapidly Quenched Ribbons

Effect of Co on the martensitic transformation, crystal structure and magnetization of Ni 52.5 Mn 23.5 Ga 24 based ferromagnetic shape memory alloys

Microstructural Characterisation and Properties of Quaternary Ni50Mn29Ga20Gd1 Ferromagnetic Shape Memory Alloy

Microstructure and correlated mechanical properties study of Ni-(Fe, Co)-Mn-(Al, In) as-spun ribbons