Abstract:A coupled thermo-metallo-mechanical model is proposed to analyse the temperature, stress and microstructure fields in multi-pass welding of P92 pipes. An axisymmetric model is adopted to increase the efficiency of the simulation. To preserve the temperature field from a three-dimensional (3D) analysis, a procedure is proposed to convert the 3D result into a two-dimensional (2D) form, which is compared to temperature fields created by other 2D heat transfer analyses. A metallurgical algorithm, which does not need the calibration with metallurgical experiments, is implemented in the finite element (FE) analysis to predict spatial distributions of product phases during multi-pass welding. Comparison between the predictions and the metallurgical graphs is made to verify the effectiveness of the metallurgical analysis after twenty thermal cycles. Hardness test is also employed to characterize the microstructure and to validate the metallurgical predictions. Five temperature fields, one created from the newly proposed approach and four from existent ones, are used as external loads to conduct the mechanical analysis. The volumetric change due to the phase transformation is considered as an extra volumetric strain, which is implemented by user subroutine. The stress distributions predicted using the five temperature fields are plotted together with the 3D stress result to examine the effectiveness of the developed procedure. The stress at the external surface of the pipe is measured by the X-ray diffraction technique, and is further compared to the stress predictions. The advantage of the model is demonstrated by comparing the computational time consumed in the mechanical analysis.

INVESTIGATION ON TWO ASSESSING CRITERIA IN LOCAL POSTWELD HEAT TREATMENT

Assessing Criterion in Local Postweld Heat Treatment Based on Visco-Elastic-Plastic Theory

Determination of Heated Band Width Criterion of Local Postweld Heat Treatment for Cr-Mo Steel Pipe

Effect of Residual Stress Distribution in Multi-Pass Welding on Stress Relief Criterion in Local Post Weld Heat Treatment of Pipe

Heated band width criterion in local post weld heat treatment of three dimensional tubular joint

Heated Band Width Criterion Based on Stress Relief in Local Post Weld Heat Treatment of Concurrent Tubular Joint

Local Post Weld Heat Treatment of a Pressure Vessel: A Postmortem Evaluation

Effect of Post-Weld Heat Treatment on the Plastic Buckling of Welded Cylindrical Shells

The primary-auxiliary local post-welding heat treatment method to control welding residual stresses for pressure vessels

Numerical and experimental investigations on the temperature field in local post weld heat treatment of 9 % Cr heat resistant steel welded pipes

Prediction of Residual Stress Distributions in Welded Sections of P92 Pipes with Small Diameter and Thick Wall Based on 3D Finite Element Simulation

Process parameter optimization for local post-weld heat treatment.of turbine rotor based on uniform design

A Primary Plus Secondary Local PWHT Method for Mitigating Weld Residual Stresses in Pressure Vessels

Influence of heating conditions on temperature distribution during local PWHT

Numerical simulation of residual stress before and after post-weld heat treatment in butt-welded pipes with dissimilar steel

Criteria for Heated Band Width Based on Through-thickness Temperature Distribution. Numerical Study on Local PWHT of Butt Welded Pipe. Report 1.

Evolution of Residual Stresses in Dissimilar Steel Surfacing Layers During Process of Post-Weld Heat Treatment

On Residual Stress and Relief for an Ultra-Thick Cylinder Weld Joint Based on Mixed Hardening Model: Numerical and Experimental Studies

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Determination of critical heated band width during local PWHT by creep analysis

Comparison of Stress Relief by PWHT and VSR in Large-Dimension Straight Welded Pipe