Abstract:Batch experiments were conducted to evaluate the ability of various forms of phytate, the hexaphosphoric form of myo-inositol (IP6), to immobilize U, Ni, and other inorganic contaminants in soils and sediments. A Ca-phytate precipitate (Ca(n)-IP6), dodeca sodium-phytate (Na12-IP6), and hydroxyapatite (HA) were added to contaminated soil at rates of 0, 10, 25, and 50 g kg(-1) and equilibrated in 0.001 M CaCl2. The samples were then centrifuged, the solution pH was measured, and the supernatants were filtered prior to analysis for dissolved organic carbon (DOC), U, Ni, P, and other inorganic contaminants, such as As, Cr, Se, and Pb. The residual sediments were air-dried prior to characterization by analytical electron microscopy and extraction with the Toxicity Characteristic Leaching Procedure (TCLP). The solubility of several metals (e.g., U, Pb, Cu) increased with increasing Na12-IP6 when compared with the nonamended control. In some cases immobilization was observed at the lowest Na12-IP6 application rate (10 g kg(-1)) with an increase in solubility observed at the higher rates, demonstrating the importance of metal to ligand ratio. In contrast, Ca(n)-IP6 and HA decreased the solubility of U, Ni, Al, Pb, Ba, Co, Mn, and Zn. For example, soluble U decreased from 2242 to 76 microg kg(-1) and Ni from 58 to 9.6 mg kg with the Ca(n)-IP6 addition, similar to the results observed for HA. Arsenic and Se solubility increased for HA and both forms of IP6, but to a much greater degree for Na12-IP6, suggesting that the increase in pH observed for HA and Na12-IP6, combined with added competition from PO4 and IP6 for sorption sites, resulted in the release of sorbed oxyanion contaminants. The analytical electron microscopy results indicated that metals such as U and Ni were closely associated with secondary Al-rich precipitates in the HA-treated soils, rather than unreacted HA. The analytical electron microscopy results were less definitive for the Ca(n)-IP6-treated soil, although the residual P-containing material was enriched in Al, with lesser amounts of U and Ni.

Formation of Inositol Hexaphosphate Monolayers at the Copper Surface from a Na-salt of Phytic Acid Solution Studied by in Situ Surface Enhanced Raman Scattering Spectroscopy, Raman Mapping and Polarization Measurement

Electroless Plating of Copper via a Sn-Free Process on Dielectric SiLK Surface Modified by UV-Induced Graft Copolymerization with 4-Vinylpyridine and 1-Vinylimidazole

2-Amino-5-(4-pyridinyl)-1,3,4-thiadiazole Monolayers on Copper Surface: Observation of the Relationship Between Its Corrosion Inhibition and Adsorption Structure

ELECTROCHEMICAL, DFT AND MULTISCALE SIMULATION STUDIES ON SELF-ASSEMBLED FILMS OF 2-AMINO-4-METHYL-PYRIDINE INHIBITOR FOR COPPER METAL CORROSION PROTECTION IN 3.5% NaCl MEDIUM

Self-assembled monolayer of ammonium pyrrolidine dithiocarbamate on copper detected using electrochemical methods, surface enhanced Raman scattering and quantum chemistry calculations

In Situ Click-Assembling Monolayers on Copper Surface with Enhanced Corrosion Resistance

Effect of Nitrogen-containing Groups on the Reduction of Copper Ions: in Situ Raman and AIMD

Electrochemical Investigation of Dynamic Interfacial Processes at 1-Octadecanethiol-modified Copper Electrodes in Halide-Containing Solutions

Inhibition of Copper Corrosion in Sodium Chloride Solution by the Self-Assembled Monolayer of Sodium Diethyldithiocarbamate

Effect of Surface Polymeric Organosilicon Nanolayers on the Electrochemical and Corrosion Behavior of Copper

Electroless Copper Deposition and Interface Characteristics of Ionic Electroactive Polymer

Inhibition of copper corrosion by self-assembled monolayers of triazole derivative in chloride-containing solution

Long-term protective mechanism of poly(N-methylaniline)/phosphate one-step electropolymerized coatings for copper in 3.5% NaCl solution

SERS studies of synergetic effect in corrosion inhibition for Cu by a two-component inhibitor system of polyvinylimidazole and benzimidazole

Experimental and theoretical study of 2-mercaptopyridine as an effective eco-friendly inhibitor for copper in aqueous NaCl

Surface Enhanced Raman Scattering, in Situ Spectro-Electrochemical, and Electrochemical Impedance Spectroscopic Investigations of 2-Amino-5-mercapto-1,3,4-thiadiazole Monolayers at a Silver Electrode

Self-assembled monolayers of Ginkgo biloba exocarp extract for corrosion protection of copper

Counterion loss from charged surface-bound complexes drives the formation of loosely packed monolayers

Investigation of the inhibition properties and mechanism of salicylaldoxime for copper corrosion via experimental and theoretical methods

In situ treatment of metals in contaminated soils with phytate

Electrochemical and Xps Investigation of Phthalocyanine Oligomer Sulfonate As A Corrosion Inhibitor for Iron in Hydrochloric Acid