Abstract:Ni-Co-W is an alloy with excellent overall performance and wide application prospects. Electrochemical deposition of Ni-Co-W alloys is currently the most promising process for replacing hexavalent chromium plating. Variations in the W content of the Ni-Co-W coating significantly affect its surface morphology, internal structure, and mechanical properties. Considering the numerous defects with conventional electrochemical deposition, a laser was introduced to enhance the quality and rate of deposition. Using a multienergy composite field, the deposition technique enhanced various properties at room temperature. Ni-Co-W alloy coatings were fabricated through electrochemical deposition and laser electrochemical deposition using electrolytes containing Na2WO4·2H2O at concentrations of 12, 15, 18, and 24 g/L in this investigation. This study aimed to examine how laser irradiation strengthens the corrosion resistance of the coatings. The corrosion resistance could be enhanced with an initial W content increase, but the corrosion resistance did not depend entirely on the W content. Variations in the W content of the electrochemically deposited coatings affected the surface morphology, residual internal stresses, and crystal structure, changing the corrosion resistance. In contrast, the laser electrochemical deposition coating was caused by the combined effect of the W content and laser irradiation (concentration of <18 g/L). Laser electrochemical deposition of the Ni-Co-W coating resulted in a higher W content than electrochemical deposition (≥3.5%), improved the residual internal stresses, and refined the grain size of the coating, resulting in better corrosion resistance (corrosion rate decreased by 74% and Rct increased by 109.1% at most).

Synthesis and Evaluation of Pulse Current and Direct Current Electroplating Ni-W Coatings on Steel

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Study on Direct-Current Electroplated Ni-W-P Layer

Preparation and Properties of Textured Ni–W Coatings Electrodeposited on the Steel Surface from a Pyrophosphate Bath

Effect of Pulse Electrodeposition Mode on Microstructures and Properties of Ni-TiN Composite Coatings

Wear and Corrosion Properties of Crystalline Ni-W Alloy Coatings Prepared by Electrodeposition

Microstructure and wear properties of crystalline W alloy coatings prepared by electrodeposition

The Influence of Pulse Plating Parameters on the Structure and Corrosion Behavior of Ni-W-TiC Nanocomposite Coatings

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate

Coating process conditions of W alloy electrodeposition

Preparation and Investigation of Ni–Co–P Alloy Coatings Using Jet Electrodeposition with Varying Pulse Parameters

Study on Electroless Plating Ni-W-P Ternary Alloy with High Tungsten from Compound Complexant Bath

Investigation of the Enhancement Mechanism of Electrochemically Deposited Ni–Co–W Coatings via Laser Irradiation: Effect of W Contents on Corrosion Resistance

Process for Nickel-Phosphorous Pulse Electroplating and Corrosion Resistance of the Alloy Coating

Preparation and Characterization of Pulse Electrodeposited Ni/W-SiC Nanocomposite Coating on Mild Steel Substrate

The Research on Coating of Electroless Ni-W-P Ternary Alloys

Influence of Electrodeposition Process Parameters and Si3N4 Nanoparticle Concentration on Microhardness and Wettability of Ni-Co-Si3N4 Nanocomposite Coatings

Pulsed electroplating of ZrO2-reinforced Ni-Cr alloy coatings from the duplex complexing agents-containing bath for engineering applications: Importance of operating conditions

Preparation and Corrosion Resistance of Ni-W-CF Composite Coating on P110 Steel

A Study on the Influence of the Electroplating Process on the Corrosion Resistance of Zinc-Based Alloy Coatings

Effect of SiC Nanoparticles on the Structure and Properties of Ni+W-SiC Nanocoatings