Abstract:Solid oxide fuel cell directly and efficiently converts chemical energy to electrical energy. However, the necessity for high operating temperatures can result in mechanical failure. Fuel cell is a multilayer system and its stress distribution is greatly affected by the interface morphology. In this work, cosine interfaces with different amplitudes are used to approximate the fluctuation of actual interface. The effects of interface morphology on stress state, energy release rate of crack and creep behavior have been investigated. The results show that if the interface is planar, the residual normal stress component is zero on the interface, while the nonplanarity of interface can cause the normal stress S-n and shear stress S-t on the interface. When the amplitude is relatively small, the max values of S-n and S-t on the interfaces vary linearly with increasing amplitudes in both anode and cathode. Above a certain value, nonlinearity of the interface becomes important. Max tensile S-n always occurs at the peak of convex interface, but the position of max compressive S-n varies. Max shear stress is prone to occur at 1/4 of the wavelength at small amplitude and moves towards 1/2 of the wavelength when the amplitude increases. Fracture mechanics analysis shows that the surface crack possibly penetrates into the anode function layer and then is constrained by the stiff electrolyte. On the other hand, the horizontal crack likely penetrates into the electrolyte layer when the interface is not planar. Creep analysis shows that 11 800 hours of continuous operation at high temperature cannot remove stress undulation introduced by nor-planar interface but can make max value of Sn and St decrease around 30%.

Effects of impurities on the degradation and long-term stability for solid oxide fuel cells

Study on Component Interface Evolution of a Solid Oxide Fuel Cell Stack after Long Term Operation

Evaluation of Impurity Levels in Real SOFC Stacks and Modules

Degradation analysis of commercial interconnect materials for solid oxide fuel cells in stacks operated up to 18000 hours

Improvement on Durability and Thermal Cycle Performance for Solid Oxide Fuel Cell Stack with External Manifold Structure

Fundamental mechanisms limiting solid oxide fuel cell durability

Long-term thermo-mechanical performance evolution of a 15-cell solid oxide fuel cell stack

Performance and degradation of metal-supported solid oxide fuel cells with impregnated electrodes

Long-Term Test of a Solid Oxide Fuel Cell Stack with External Manifold Structure

Long-term Stability of Metal-Supported Solid Oxide Fuel Cells Employing in Fi Ltrated Electrodes

Material Transport and Degradation Behavior of SOFC Interconnects

Electrochemical Analysis of an Electrolyte-Supported Solid Oxide Cell-Based MK35x Stack during Long-Term Electrolysis Operation

A review on solid oxide fuel cell durability: Latest progress, mechanisms, and study tools

Performance Degradation and Analysis of 10-Cell Anode-Supported SOFC Stack with External Manifold Structure

Long-Term Operation and Post Analysis of a Stack with Methane Fuel

Degradation Analysis and Durability Improvement for Sofc 1-Cell Stack

Performance and degradation of an SOEC stack with different cell components

Degradation Analysis of Plasma Sprayed Metal-Supported Solid Oxide Fuel Cell: the Evolution of Electrode Processes under Polarization

Test and Modelling of Solid Oxide Fuel Cell Durability: A Focus on Interconnect Role on Global Degradation

Effect of Interface Morphology on the Residual Stress Distribution in Solid Oxide Fuel Cell

Performance Degradation Analysis of Solid Oxide Fuel Cells Using Dynamic Electrochemical Impedance Spectroscopy