Abstract:Second generation advanced high strength steel is one promising material of choice for modern automotive structural parts because of its outstanding maximal elongation and tensile strength. Nonetheless there is still a lack of corrosion protection for this material due to the fact that cost efficient hot dip galvanizing cannot be applied. The reason for the insufficient coatability with zinc is found in the segregation of manganese to the surface during annealing and the formation of manganese oxides prior coating. This work analyses the structure and chemical composition of the surface oxides on so called nano-TWIP (twinning induced plasticity) steel on the nanoscopic scale after hot dip galvanizing in a simulator with employed analytical methods comprising scanning Auger electron spectroscopy (SAES), energy dispersive X-ray spectroscopy (EDX), and focused ion beam (FIB) for cross section preparation. By the combination of these methods, it was possible to obtain detailed chemical images serving a better understanding which processes exactly occur on the surface of this novel kind of steel and how to promote in the future for this material system galvanic protection.FigureThe image shows an Auger mapping of a hot dip galvanised TWIP steel after removing the surface oxides by Ar sputtering. The shown signal contains intensity information based on topography and work function and elemental distribution of Mn, Fe and Zn shown in blue, green and red

Research Progress of Hot-Dip Galvanizing for High-Strength Steel

Development of Powder Metallurgy High Speed Steel

The Research on Al-Si Coating for Hot Forming Steel

A Review of Recent Developments in Coating Systems for Hot-Dip Galvanized Steel

Production Process and Technology Development of Hot-Dip Galvanizing

In-Situ Wettability Analysis of Al Coating Influence on Hot-Dip Galvanizing Properties of Advanced High-Strength Steels

Oxide Metallurgy Technology in High Strength Steel: A Review

Hot-Dip Galvanizing of Carbon Steel after Cold Rolling with Oxide Scale and Hydrogen Descaling

Study on the Alloy Coatings Properties of the New Rare Earth Yttrium Zinc Aluminum Magnesium

Effect of Hot-Dip Galvanizing Process on Selective Oxidation and Galvanizability of Medium Manganese Steel for Automotive Application

Progress In Application And Research Of High Strength Steel Structures

Effects of Al contents on microstructure and properties of hot-dip Zn-Al alloy coatings on hydrogen reduced hot-rolled steel without acid pickling

Analysis of the delayed cracking mechanism of an industrial hot-dip galvanized DP1180GI steel coil

Research Status of Weldability of Advanced Steel

Progress on effects of alloying elements on bainite formation and strength and toughness of high strength steel weld metal

A review of physical properties of hot-dip galvanized coating layer by layer and their respective electrochemical corrosion behavior

Progress in Preparation of Corrosion Resistant Zinc-magnesium Alloying Coating

The Main Failure Modes of Hot-Work Die Steel and the Development Status of Traditional Strengthening Methods and Nano-Strengthening Technology

Nanoscale surface analysis on second generation advanced high strength steel after hot dip galvanizing

Impact of Copper, Tin and Titanium Addition on Bending-Induced Damage of Intermetallic Phases in Hot Dip Galvanizing

Effects of Alloying Elements on Surface Oxides of Hot-Dip Galvanized Press Hardened Steel