Abstract:Recent advancements in long-term space exploration, maintenance-free miniature-satellites and drone infrared detections have created a large demand for highly reliable and miniaturized cryocoolers working at 77–150 K. The pulse tube cryocooler (PTC) has no moving part at the cold end, and if driven by a gas bearing linear compressor which has no mechanical fatigue risk, a refrigeration system with high reliability and compactness will be generated. However, very few researches on the cooling performance of PTC driven by gas bearing linear compressor have been reported. In this study, a miniature PTC and gas bearing compressor are developed, with a weight of the whole refrigeration system about 0.97 kg. The maximum cooling capacity reaches 1.73 W at 77 K with input electric power of 66 W. The cooling capacity per unit weight for this cryocooler is 1.78 W/kg at 77 K, which is the highest compared to those of the existing typical miniature cryocoolers, showing its remarkable lower mass for refrigeration. In addition, the influence of the hot end heat dissipation temperature on the cooling performance is studied. It is found that the heat dissipation temperature of the hot end has a significant effect on the cooling performance. For every 10 K decrease in the hot end temperature, the maximum cooling capacity at 77 K increases by 3.45 % to 13.28 %, the relative Carnot efficiency rises by 4.38 % to 12.59 %. Besides, in the miniature PTC, the cooling performance is very sensitive to the length of the inertance tube, even a small change of 10–20 mm on the length of the inertance tube will lead to obvious effect on the optimum frequency and cooling performance of the system. These results will be helpful for the further research and development of the miniature pulse tube cryocoolers.

Study on vibration mechanism of pulse tube cryocooler and vibration-reduction methods

Advancing Cryogenic Electronic Cooling: A Case Study on Embedded Manifold Microchannels in Micromachined Joule-Thomson Coolers

Advances in high frequency pulse tube cryocooler research(PartⅠ)

Refrigeration characteristic experiment in 40 K region of a two-stage pulse tube cryocooler driven by a standing wave thermoacoustic engine

Advances in Thermoacoustic Engine and Its Application to Pulse Tube Refrigeration

Thermoacoustically Driven Pulse Tube Cooler below 60K

Theoretical and Experimental Study for the Transient Behavior of a Linear Compressor During Pulse Tube Cryocooler Cool Down Process

STUDY ON A THERMOACOUSTICALLY DRIVEN PULSE TUBE REFRIGERATOR OPERATING AT 124K

Vibration Control for Mechanical Cryocoolers

Study on a Cascade Pulse Tube Cooler with Work Recovery

Design of A Valved Moving Magnet Type Linear Compressor for A Joule-Thomson Cryocooler

Design and primary experiments for a pneumatically driven split-Stirling cryocooler operating at hundred hertz range

A Critical Review of Liquid Helium Temperature High Frequency Pulse Tube Cryocoolers for Space Applications

Modeling and Experiments on Fast Cooldown of A 120 Hz Pulse Tube Cryocooler

Study on Cooling Capacity Characteristics of an Open-Cycle Joule-Thomson Cryocooler Working at Liquid Helium Temperature

Pulse tube cryocooler with self-cancellation of cold stage vibration

Study on the Method of Improving the Input Power of the Linear Compressor in a High Capacity Pulse Tube Cryocooler

Study on the refrigeration performance of a miniature pulse tube cryocooler driven by a gas bearing compressor

Experimental Study on a Floating Scroll-Type Compressor Driving a Precooled JT Cryocooler

Experimental study on a three-stage cascade pulse tube cryocooler with transmission tube

120 Hz Pulse Tube Cryocooler For Fast Cooldown To 50 K