Abstract:Sintering behaviour of ashes from combustion of coal and biomass blends was experimentally investigated with a focus on the effect of ash preparation method. Blends of a Chinese anthracite, Jincheng coal, and two biomass materials, a wheat straw and a pine sawdust, respectively, were subjected to three different ash preparation procedures, namely, a low temperature oxygen plasma ashing device operating at ca 150 degrees C, combustion in a Muffle furnace at 815 degrees C and in a drop tube furnace at 1500 degrees C. The resulting ash samples were then subjected to the sintering temperature measurement using a pressure-drop sintering device, morphological and mineralogical characterisation using scanning electron microscope (SEM) fitted with X-ray energy dispersive spectroscopy (EDS) and X-ray diffractometry analyser (XRD), respectively. For the same coal and biomass blends but different ash preparation methods, the sintering temperatures were always the lowest for the ash samples from the plasma ashing device and the highest from drop tube furnace. SEM imaging showed that the texture of ash samples from the plasma ashing device was irregular, loose and more fibrous, indicating little interactions among the different mineral and inorganic constituents in the individual fuels. The muffle furnace and drop tube furnace ashes were denser and more uniform in shape as the mineral matter and inorganics became fused together. In addition, the drop tube furnace ashes were mostly in spherical-shape, indicating ash melting had occurred during combustion. The XRD analysis revealed that different minerals were present in the ash samples due to different ash preparation temperatures, with high temperature minerals present in the drop tube furnace ash. Biomass addition in the blends lowered the sintering temperature of corresponding ash; the higher the proportion of biomass in the blend, the lower the ash sintering temperature regardless the ashing method. At the same biomass addition ratio, the ash sintering temperature of the blend with the wheat straw addition was lower than that with the pine sawdust addition, because the wheat straw had a higher K and Cl content but lower Ca than the pine sawdust. The EDS and XRD analyses confirmed that the ashes of coal/wheat straw blends contained more K-bearing minerals, while the ashes of the coal/pine sawdust contained more Ca and K-bearing minerals. Both Ca and K-bearing minerals reacted with other minerals in the ash to form low temperature eutectics, leading to the reduction of sintering temperatures of the coal and biomass blends. However, the melting points of the K-containing minerals are higher than the Ca-containing minerals, therefore, the sintering temperatures of ash with the wheat straw addition were lower than those with the pine sawdust addition. (C) 2016 Elsevier Ltd. All rights reserved.

Study of the Sulfur Retention Characteristics of Biomass Ash in CFB (circulating Fluidized Bed) Combustion

THE STUDY OF SULFUR TRANSFORMATIONS IN BIOMASS COMBUSTION

Effect of Ash Preparation Method on the Sintering Characteristics of Ashes from Combustion of Coal and Biomass Blends

Experimental Study on the Characteristics of Self-Desulfurization During Sugarcane Leaf Combustion in a Circulating Fluidized Bed

Experimental Study on the Sintering Characteristics of Biomass Ash

SO2 Absorption by Multiple Biomass Ash Types

STUDY ON SO_2-RELEASING REGULARITY IN THE PROCESS OF MIXDELY BURNING COAL AND BOIMASS

Study on Ash Fusion Temperature Using Original and Simulated Biomass Ashes

Particulate Matter Emission and K/S/Cl Transformation During Biomass Combustion in an Entrained Flow Reactor

EXPERIMENTAL STUDY OF ASH DEPOSIT DURING CO-FIRING SAWDUST AND COAL

Effect of Circulating Ash on Sulfur Conversion Characteristics in the Coal Polygeneration Process

Experiment Study on Ash Fusion Characteristics of Cofiring Straw and Sawdust

Composition and Sintering Characteristics of Ashes from Co-Firing of Coal and Biomass in a Laboratory-Scale Drop Tube Furnace

Further Study on Biomass Ash Characteristics at Elevated Ashing Temperatures: the Evolution of K, Cl, S and the Ash Fusion Characteristics.

Modeling of Sulfur Retention in Circulating Fluidized Bed Coal Combustors

Study On So2 Removal During Pulverized-Coal Combustion

Reduced Pollutant Emissions and Slagging Rate of Biomass Pellet Combustion by Optimizing the Multilayer Distribution of Secondary Air

Experimental Investigation on the Combustion and Heat Transfer Characteristics of Wide Size Biomass Co-Firing in 0.2 MW Circulating Fluidized Bed

A Study Of The Composition Of Ash Deposits In An Fbc System

Experiments on the Effect of Chemical Components of Coal Ash on the Sintering Temperature

A study on the release characteristics and formation mechanism of SO2 during co-combustion of sewage sludge and coal slime