Abstract:Dielectric loss factor measurement is an important index in accessing the insulation performance of power equipment. With the development of the condition-based maintenance and smart grid, more attention has been paid to online diagnostic technologies for the dielectric loss factor measurement. Various methods have been developed in this field in which harmonic analysis (HA) is prevalent due to its performance of resisting disturbance and stability superior to others. When performing the HA method on the sampled data, the non-simultaneous sampling and the lack of synchronization between sampling rate and the signal period are believed to be the main source of error in the measurement of the magnitude and the phase of the signals. To improve the effectiveness of the HA method, measures were taken by means of the designing online monitoring system. The basic principle of the HA method is presented in this paper and an online monitoring system based on DSP technology is developed accordingly. At last, this paper analyses the on-line monitoring results resulted from the online monitoring system on a substation. To ensure the safe and reliable operation of a power system it is necessary to monitor periodically the insulation condition of HV apparatus. This may be accomplished through measuring partial discharge levels, dielectric loss factor and capacitance using conventional well-established time based maintenance method. To implement these routine tests require removal of equipment from service, however, the measure and continuous monitor may be carried out directly if on-line monitoring method is adopted. These on-line dielectric loss factor measuring methods detect the current flowing through the test object and the voltage signal applied to it. The various techniques reported in the literature differ from each other in the manner how the signals are acquired and how the gathered data are handled. In the work reported in this paper a distributed on-line monitoring system has been developed based on

Application Analysis of Admittance Method Used for Fault Monitoring of Secondary Loops

Research on automatic detection method of secondary circuit connection of the measuring device mutual inductor

A Fault Diagnosis Method for Solid-state Fault Current Limiters Used in Three Phase Ungrounded System

A Novel Method for Current Transformer Saturation Countermeasure Based on Comparing Two Currents' Polarities

A new detecting method of break in secondary circuit of current transformer in micro-based differential protection of power transformer

A Generalized Admittance Based Method for Fault Location Analysis of Distribution Systems.

Analysis of Leakage Current along Insulating Surface of Electrical Apparatuses in Substation

Multiple Failures Analysis for Complex Electric Power System

Design and Application of the Distribution Fault Assistant Analysis System

Study of on-line fault detection and diagnostics of the parallel-pained multibranch electric power lines

Modelling and Application of Secondary Circuit Signals for Power Grid Intelligent Alarm

FAULT CURRENT DETECTION METHOD USING MEASUREMENT CURRENT TRANSFORMER FOR DISTRIBUTION AUTOMATION

Analysis of Affecting Factors on Fault Shunt Coefficient in Substation

The New Method for Ground Insulation Monitoring of the Secondary Circuit in Substations

Corrosion Fault Diagnosis for Substation's Grounding Grid Based on Micro Method

Abnormal Phenomenon Discrimination Method of DC Parasitic Loop for Substation

ANALYSIS AND COUNTERMEASURE FOR MISOPERATION OF LONGITUDINAL DIFFERENTIAL PROTECTION WITH UNCLEAR REASON

A non-contact current traveling wave fault location method for multi-terminal overhead power lines based on adaptive mathematical morphology

Research on online monitoring and early warning technology of tripping and closing circuit of intelligent substation

An Identification Method for Asymmetric Faults With Line Breaks Based on Low-Voltage Side Data in Distribution Networks

Harmonic Analysis Study for High-voltage Distribution Equipment on Power Factor