Abstract:In this investigation, a series of Na0.5Bi0.47Sr0.02TiO3-δ samples are sintered from1000 to 1100°C, were synthesized utilizing the solid-state method. The XRD results indicate that all samples exhibit a perovskite phase, with the exception of those sintered at 1100 °C, which display no discernible impurity peaks.The SEM results indicate that the average grain size exhibits an increase proportionate to the sintering temperature,which attributes to the variations in the actual Na/Bi ratio. From the study of grain conductivity we can obtain that the dominant factor affecting grain conductivity is the activation energy.At 1100°C,the oxygen vacancy concentration emerges as the primary determinant of grain conductivity. It should be noticed that the phase transition temperature of the sample increases (350°C→400°C) with the increase of sintering temperature, which is due to the local A-site disorder aggravated by high temperature sintering. Therefore, reducing the sintering temperature is beneficial to improve the grain conductivity. The grain boundary conductivity initially rises, then diminishes with increasing sintering temperature.It is evident that the enhanced macroscopic grain boundary conductivity stems from a marked reduction in space charge potential within the 1000-1025°C temperature range. Within the 1050°C-1100°C temperature range,the space charge potential barely changed,the significant decrease of intrinsic grain boundary conductivity can be attributed to the surge in the coverage ratio of grain boundary impurities and the number of grain boundary impurities increased caused by the rapid reduction of grain boundary area and thermal evaporation.The research on electrical performance of NBT-based oxygen-ion conductors will promote the application of NBT-based oxygen ion conductors in solid oxide fuel cells, oxygen sensors and other fields.

The Study on High Temperature Conductivity of Nanocrystalline BaTiO3 Ceramics

High thermoelectric performance of Nb-doped SrTiO3 bulk materials with different doping levels

Enhancement of P-Type Conductivity, in Nanocrystalline Batio3 Ceramics

Temperature Dependence on the Dielectric and Ferroelectric Properties of Nanocrystalline BaTiO_3 Ceramics

Temperature and Applied Field Effect on Ferroelectric Properties of Nanocrystalline BaTiO_3 Ceramics

Anomalous Conductivity Behavior Induced by in Situ Metastable Amorphous Phase in BaTiO3/Ni0.5Zn0.5Fe2O4 Ceramic Composite

Electric Properties of BaTiO3 Ceramics Sintered with the Hydrothermally Prepared Powers

Effect of Sintering Temperature on Microstructure and Electrical Properties of Na0.5Bi0.47Sr0.02TiO3-δ Ceramics

High-temperature Impedance Spectroscopy of BaFe 0.5 Nb 0.5 O 3 Ceramics Doped with Bi 0.5 Na 0.5 TiO 3

Significant Increase Of Curie Temperature In Nano-Scale Batio3

Effects of Grain Size and Temperature on the Energy Storage and Dielectric Tunability of Non-Reducible BaTiO3-based Ceramics

Modification of High-Temperature Electrical Properties in CaTiO3 Ceramics by Sm3+and Al3+doping

Study on microstructure and properties of nanograin ferroelectric ceramics

Effect of Particle Size on Microstructure and Properties of Nano-Doped BaTiO3 Ceramics

Investigation of electrical conductivity and oxygen relaxation behavior for BaBi0.98Sr0.02Nb5-xTixO15-δ ceramics

Effect of Mn 2+ doping on the temperature coefficient of capacitance of TiO 2 /SiO 2 -doped BaTiO 3 ceramics

Study on Positive Temperature Coefficient of Resistivity of Co-Doped BaTiO3 with Curie Temperature in Room Temperature Region

Processing, Microstructure and Properties of Nanograin Barium Titanate Ceramics by Spark Plasma Sintering

Study on peculiar properties of nanocrystalline BaTiO3 powder and ceramics

Investigation of the modulation effects of BiNbO4 doping on BaTiO3-based ceramics

Temperature-Dependent Electrical Properties of 0.94Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-0.06BaTiO<sub>3</sub>Ceramics