Abstract:The cooling of the motor is one of key factors of keeping higher running efficiency of the refrigeration compressor. Suction refrigerant gas cooling motor is a widely used cooling method but it has poor cooling effect. A novel method of directly cooling screw compressor motor by thermosyphon refrigerant was proposed by authors. In this paper, the refrigeration system with thermosyphon refrigerant cooling motor (RSTRCM) and its basic principle were introduced firstly, then the mathematical model of energy and exergy of the system was built, and the test loop of an NH3/CO2 cascade refrigeration system was set up. Finally, compared with the refrigeration system with compressor suction gas cooling motor (RSCSCM), numerical analysis results showed that as condensation temperature of LTL is 5°C, RSTRCM can get higher exergy efficiency by up to 23.53%, and if condensing temperature of LTL increases from -5°C to 5°C, the power consumption of CO2 compressor and NH3 compressor in RSTRCM were reduced by 4.26% and 5.46% on average, separately. The test results showed that as the condensing temperature of the system is 40°C and the evaporation temperature is -45°C, -35°C, and -30°C, the coefficient of performance (COP) of RSTRCM were higher than that of RSCSCM by 10.42%, 6.61%, and 6.25%, respectively, which verify that the method of thermosyphon refrigerant cooling compressor motors can significantly improve the performance of the NH3/CO2 cascade refrigeration system.

Thermodynamic Analysis of Compressor-Driven Metal Hydride Refrigeration System

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Dynamic Simulation of One-Stage G-M Refrigerator and Comparison with Experiment

Performance Evaluation of a Modified Refrigeration Cycle with Parallel Compression for Refrigerator-Freezer Applications

Simulation of Dynamic Characteristics of Moving Magnet Linear Compressor for Refrigerator

Theoretical Investigations on the Cycle Performance of a Single-Pressure Diffusion Absorption Heat Transformer with LiBr–H2O-R134a-TEGDME

Optimization Analyses on the Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Numerical investigation and optimization of a proposed heat-driven compression/absorption hybrid refrigeration system combined with a power cycle

Proposal and thermodynamic analysis of an ejection-compression refrigeration cycle driven by low-grade heat

Dynamic modeling and performance analysis of metal hydride hydrogen storage system

Analysis of Features of J-T Refrigeration Cycles Using Mixed Refrigerants with an Infinite Low Temperature Heat Reservoir

Thermodynamic Analyses of Scroll Refrigeration System with Economizer

Thermodynamic Performance of an Actual Thermo-Acoustic Refrigeration Micro-Cycle

Investigations on Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Numerical simulation of a multistage magnetic refrigeration system in the temperature range of liquid hydrogen

Simulation Study on Single-machine Two-chamber In-parallel Compression Refrigeration/Heat Pump System

Thermodynamic analysis of NH3/CO2 cascade refrigeration system with thermosyphon refrigerant cooling screw compressor motor

Thermodynamic Analysis of Performance of Steam Methane Reforming Hydrogen Production System Connected with High-Temperature Gas-Cooled Reactor

Performance Simulation on Economizer System Coupled with Scroll Compressor

Off-Design Performance of an Exhaust-Fired Absorption Refrigerator

A hybrid modeling method of metal hydride tank and dynamic characteristic analysis