Abstract:A simulation model using the first thermodynamic law is first proposed to estimate the performance of diffusion absorption heat transformer, which could potentially improve energy utilization efficiency and reduce CO2 emission. Thermodynamic analyses are performed to investigate the cycle performance when H2O is employed as refrigerant, LiBr as absorbent for H2O, R134a as diffusion gas and TEGDME as absorbent for R134a. Analyses aim to optimize system COP under specified temperature of two generators, two absorbers, evaporator and condenser, and compare the influence of the six temperatures on COP. The results under design conditions show that larger generation efficiency of R134a and smaller mass fraction of LiBr in H2O–LiBr solution are beneficial to COP improvement, but they are limited by the operating conditions. There is an optimal ratio of H2O–LiBr solution mass flow rate to R134a mass flow rate for an optimal COP, and the optimal ratio decreases with the increase of LiBr mass fraction in H2O–LiBr solution. The highest COP of 0.1701 is reached with the optimal ratio of 1.743. In addition, under design-off conditions, the temperatures of refrigerant generator and evaporator have the greatest influence on COP while the temperature of diffusion gas generator has the least influence. The diffusion absorption heat transformer will provide a new way to lift temperature of low grade heat without electricity input which can further improve the energy utilization efficiency and reduce the CO2 emission.

Thermodynamic Analyses of Scroll Refrigeration System with Economizer

Performance Simulation on Economizer System Coupled with Scroll Compressor

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Thermodynamic Analysis on a Two-Stage Transcritical CO2 Heat Pump Cycle with Double Ejectors

Performance Analysis of a Modified Autocascade Refrigeration Cycle with an Additional Evaporating Subcooler

Performance evaluation and energy-saving potential comparison of a heat-powered novel compression-enhanced ejector refrigeration cycle with an economizer

Performance Analysis of a Modified Zeotropic Mixture (R290/R600) Refrigeration Cycle with Internal Subcooler for Freezer Applications

Transient flow and thermodynamics analysis of a scroll compressor based on CFD

Simulation Study on Single-machine Two-chamber In-parallel Compression Refrigeration/Heat Pump System

Comparative Study on the Energy Performance of Two Different Absorption-Compression Refrigeration Cycles Driven by Low-Grade Heat

Mathematical Modeling of Scroll Refrigeration Compressors

Theoretical Analysis on a Novel Two-Stage Compression Transcritical CO2 Dual-Evaporator Refrigeration Cycle with an Ejector

Performance Evaluation of Novel Double Internal Auto-Cascade Two-Stage Compression System Using Refrigerant Mixtures

Investigation of the unsteady characteristic in a scroll compressor of a heat pump system for electric vehicles

Theoretical Investigations on the Cycle Performance of a Single-Pressure Diffusion Absorption Heat Transformer with LiBr–H2O-R134a-TEGDME

Theoretical Investigation of Trans-Critical Carbon Dioxide Refrigeration System with a Compressor Economizer

An Improved Geometric Theoretical Model and Throughflow Prediction Method for a CO2 Scroll Compressor of Automotive Air Conditioning System

Numerical Analysis on the Effects of Refrigerant Injection on the Scroll Compressor

Thermodynamic evaluation of two-stage refrigeration cycle with deep intercooling and series-parallel integration of thermal and mechanical compression

Upper-limit of Performance Improvement by Using (quasi) Two-Stage Vapor Compression

Thermodynamics and flow unsteadiness analysis of trans-critical CO2 in a scroll compressor for mobile heat pump air-conditioning system