Abstract:Shield tunnels, especially those with small curvature radii, are currently used in the construction of underground rail transit, and they provide important support for the future development and utilization of underground space. Generally, tunnel curvature radii no more than 350 m are considered small, and the corresponding tunnel mechanical properties are more complex than those of a straight tunnel, introducing unprecedented challenges to shield construction. Therefore, the main load types that affect the mechanical properties of shield tunnel segments with small curvature radii are summarized. Based on the Wugensong–Guangdu shield zone in the Chengdu metro No. 1 southward line, the shield machine in this area adopts passive articulation system, in situ monitoring of the segment strain and the gap between rings is conducted, and the indoor model uniaxial compression testing is performed considering only the jack thrust as the longitudinal load. The results show that the segment strain and the gap between rings are mainly affected by the jack thrust, and the axial strain is twice the circumferential strain. In the construction of shield tunnels with small curvature radii, segment damage is more likely to occur on the outer side of the tunnel axis than on the inner side. For a shield tunnel of a certain curvature, the construction difficulty during driving increases in the order of the straight line section, in (out)-curve section and full-curve section. For the same propulsion stage, the smaller the curvature radius is, the easier the segment can be damaged. These research results are of great significance to the safe construction of shield sections with curvature radii for underground rail transit in the future.

Development of Software for Composition and Deviation Correction of Universal Segments for Shield Tunnel

Control of the Shield's Vertical Attitude During Shield Tunnelling in Soft Soils

Theory and Realization of Supervision and Control System for Tunneling Machine

Analytical Solution for Segmental-Tunnel Lining Incorporating Interaction Between Adjacent Rings

Energy-saving Technology of Segment Erecting Process of Shield Tunneling Machine Based on Erecting Parameters Optimization

A Study of the Segment Assembly Error and Quality Control Standard of Special-Shaped Shield Tunnels

Full-scale Loading Test for Shield Tunnel Segments: Load-bearing Performance and Failure Patterns of Lining Structures

Research on Dislocation Monitoring for Shield Tunnel Segments with Straight Joint

Calculation of Vertical Displacements of Underground Pipelines Induced by Shield Tunneling Based on Unified Solution

Monitoring and analysis of segment leakage of shield tunnels from Hangzhou subway system

Cavity behind Special Segment Structures in Upward Shield Tunneling: A Numerical Approach

Parallel Numerical Simulation Techniques in Seismic Response Analysis of Shield Tunnel

Mechanical Behaviors of Segments in Small Curvature Radius Intervals of Shield Tunnels: From Field Monitoring to Laboratory Testing

Tunnel Lining Segment Deformation and Cracking Mechanisms during Tunneling in Complex Mixed Grounds with the Combined Mining and Shield Tunneling Method

A New Design Method of Shield Tunnel Based on the Concept of Minimum Bending Moment

Realization of Super-Large-Diameter Slurry Shield Passing through Settlement-Sensitive Area Based on Unreinforced Disturbance Control Technology

Optimization for Longitudinal Segment Joint of Metro Shield Tunnel with Straight Joint in Soft Soil Area

Numerical Investigation of the Segmental Lining Performance for a Shield Tunnel

Three-dimensional numerical modelling on localised leakage in segmental lining of shield tunnels

Automatic Modeling and Optimization Design Platform for Highway Tunnels with Application to Stress and Displacement Prediction of Surrounding Rocks during Tunnel Excavation

Synchronous shield tunnelling technology combining advancement and segment fabrication: Principle, verification and application