Abstract:To investigate the internal force response characteristics and reinforcement effects of the shield tunnel segment structure in the presence of ground load disturbances in the Hangzhou Metro, full-scale tests were conducted on three-ring misaligned assembled segments using a self-developed "Shield Tunnel Segment Hydraulic Loading System." The study examined the structural characteristics of tunnel segments under the influence of different ground resistance coefficients (λ) and eccentric loads (P), and explored the reinforcement effects of the internal tension ring method from multiple perspectives. The research results indicate that under different ground resistance coefficients (λ), the sensitivity of internal force response is concentrated in the waist concrete, with a maximum bending moment reduction of 88.8%. The effective rate of bending stiffness tends to flatten, joint bending moment transfer effects strengthen, and the bearing capacity of the segments significantly increases after reinforcement, leading to a more uniform overall structural response. Under different eccentric loads (P), the bending moment of the segments after reinforcement approximates central symmetry with a reduced distribution range. The rate of change of the effective bending stiffness (η) shifts from "rapid" to "slow," and the variation of joint bending moment transfer coefficient (ζ) stabilizes. The reinforcement with steel rings significantly enhances the overall stiffness of the segments and reinforces the joint bending moment transfer effect. The reinforcement effect of the segments can be evaluated through the bending moment transfer coefficient and effective bending stiffness. After reinforcement, the bearing capacity of the segments is noticeably enhanced, and significant forces are observed at two locations in the right waist joint, where the combination of steel plates and segments exhibits optimal performance.

Control of the Shield's Vertical Attitude During Shield Tunnelling in Soft Soils

Influences of Shield Advance Rate and Abnormal Machine Halt on Tunnelling-Induced Ground Surface Settlements

Analysis and control of ground settlement of embankments in construction of cross-river shield tunnels

STUDY OF GROUND HEAVE AND SUBSIDENCE INDUCED BY SHIELD TUNNELLING IN SOFT GROUND

Influences of tunnel slope on shield tunnelling-induced heave and subsidence of ground surface

Analysis of reverse torque of EPB shield tunneling in soft ground

ANALYSIS OF GROUND SURFACE DISPLACEMENT AND HORIZONTAL MOVEMENT OF DEEP SOILS INDUCED BY SHIELD ADVANCING

Effect of nearby undercrossing tunneling on the deformation of existing metro tunnel and construction control

Analysis on the Embankment Settlements Induced by Slurry Shield Under-Tunnelling

RESEARCH ON SOIL DEFORMATION DURING SHIELD CONSTRUCTION PROCESS

Study on the Influence and Control Methods of Shield Tunneling Through the Sensitive Buildings

Structural Monitoring of Metro Infrastructure During Shield Tunneling Construction.

Full-Scale Experimental Study on the Effect of Ground Surcharge on the Stress and Deformation of Shield Tunnels

Measurement And Analysis Of The Effect Of Shield Tunnelling Of Hangzhou Subway On The Adjacent Building

Full-scale Experimental and Structural Characterization Study of Shield Tunnel Reinforcement under Ground Stacking Loads

Characteristics and Countermeasures of Tunnel Heave Due to Large-Diameter Shield Tunneling Underneath

Research of EPB Shield Tunneling Parameter Relations and Their Influence on Stratum Displacement

Effective method for adjusting the uplifting of shield machine tunneling in upper-soft lower-hard strata

3D Analytical Solution of Soil Deformation Induced by Shield Tunnelling Construction

Field Measurement Analysis of the Influence of Double Shield Tunnel Construction on Reinforced Bridge

Analytical investigation of the shield-soil rotary friction on tunnelling-induced ground mechanical reactions